Lock switch error code

SOURCE: lock switch

Hi muffin, Turn off the machine, open the document cover, and then release the scanner lock switch. You'll see it. Any other problems let me know. Peace, Dude

SOURCE: pixma ip500 error message 5C00 - what does it mean?

I have the same message and print haed does not move at all.
I will pay for it to be fixed next week (after Easter) and let you know the cause.
Cheer's Steve

Ron

• 74 Answers
• Posted on Dec 24, 2008

SOURCE: E 2 and service error 5100 on Pixma mp160 printer

You can try to clean out the printer check to see if there is any paper jammed in it somewhere
Then realighn the printer cartridges and run a test page.
Make sure that the paper tray is not overloaded

SOURCE: i850 printer error message 5100

GO ONLINE AND TYPE IN

CANON 850i PRINTER ERROR MESSAGE 5100

ENTER

ROD

SOURCE: error code 6500

Hi there,

The 6500 error code is a logic board error code. The PCI Bus error is detected by the ASCI. Sounds like it needs new logic board. but i suggest you to first of all you can try to reset your printer -

1. Turn the printer off with the Power button (if available).
2. Disconnect the data cable from the printer.
3. Unplug the printer's power cord for approximately 10 minutes, and then plug it back in. 
4. Turn the printer back on. If this works you're done, if not try the next step.

1. After confirming that the printer is powered on, open the paper output tray.
2. Open the top cover and wait until the print head moves to the center.
3. Open the inner cover and check that ink tanks are properly seated.
4. Properly seated
5. Press down on each ink tank until a click is heard.
6. Close the inner cover and top cover

if reset method not works for you then you go for the new logic board replacement .............

Good Luck!!

................