My zenith DVD-11 duplicator is not booting up

If the LCD light on your Zenith CD/DVD duplicator is on but it is not showing as "ready," it is possible that there is an issue with the duplicator's internal components or settings. Here are a few troubleshooting steps you can take to try and resolve the issue: Check the disc trays: Make sure that all of the disc trays are closed properly and that there are no discs stuck inside the duplicator. If a tray is open or a disc is stuck, the duplicator will not be able to operate properly. Check the power source: Make sure that the duplicator is plugged into a working power source and that the power cable is securely connected to the duplicator. If the power source is not providing enough power, the duplicator may not be able to operate. Check the settings: Check the duplicator's settings to ensure that it is set up correctly for the type of disc you are trying to duplicate. For example, if you are trying to duplicate a DVD, make sure that the duplicator is set to duplicate DVDs and not CDs. Reset the duplicator: Try resetting the duplicator by unplugging it from the power source for a few minutes, then plugging it back in and turning it on. This can sometimes resolve minor issues with the duplicator's internal components. If none of these steps resolve the issue, it is possible that there is a more serious issue with the duplicator's hardware or software. In this case, it may be best to contact Zenith customer support or a professional technician for further assistance.

hola tenes el firmaware v2-27-4 dp-as3-11b

You might consider after making the first if your computer is capable of making fast copies with it.

Hi THERE, This model is now discontinued.
The replacement is DUP-DP-AS3-11B.
*NOTE: Item is not compatible with LG GH22LS30 (Directron part number DVR-GH22LS30)

Now you can easily build a Blu-ray duplicator with the Athena SATA Blu-ray controller. SATA interface simplifies cable management comparing to IDE with narrower cables and smaller connectors. SATA interface supports cables as long as 90cm without sacrificing data integrity and system reliability. Hence Athena SATA controller can be installed on the top drive bay even in an 11-target tower duplicator. Maximize your productivity and efficiency today with Athena SATA Blu-ray controller.

Features:

• Standalone, no PC required.
• DDR2 Technology allows up to 8x Blu-ray duplication.
• SATA Advantages - Thin cables for easy routing and improved cooling inside the duplicator chassis, increasing product reliability.
• Dynamic Hard Drive Partitioning automatically adjusts hard drive partitions based on the size of your master disc.
• Master Error Proof prevents duplication failures caused by disc errors. Simply exchange the failed master disc with a working disc without interrupting the duplication process.
• Dual-Level Security provides separate Startup and Setup passwords for complete restriction and protection against unauthorized users.
• Advanced Diagnosis Mode troubleshoots and sets adjustment for optimal performance.

BACK TO TOP

Specifications:

• Operating Type: Controller only
• Internal Interface: SATA
• Targets: 11
• Reading Speed: 18x DVD-ROM
• Maximum Writing Speed* (*Actual write speed depends upon media and drive specifications) : BD-R SL: 8X BD-R DL: 4X BD-RE SL: 2X BD-RE DL: 2X DVD+RW: 8X DVD-R: 20X DVD-RW: 6X DVD+R: 20X DVD+R DL: 8X DVD-R DL: 8X CD-RW: 32X CD-R: 48X
• Supported Disc Formats: BD ROM, BD-R, BD-R DL, BD-RE, BD-RE DL, DVD ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, CD-DA, CD ROM, CD-R, CD-RW, Multi-session Photo CD, CD-I, Video CD, CD ROM XA, & CD Extra (CD Plus)
• Supported Recording Discs: 12cm 25GB BD-R 12cm 25GB BD-RE 12cm 50GB BD-R DL 12cm 50GB BD-RE DL 12cm 4.7GB DVD-R/RW 12cm 4.7GB DVD+R/RW 12cm 8.5GB DVD+R DL 12cm 8.5GB DVD-R DL 12cm 80min / 700MB CD-R 12cm 74min / 650MB CD-RW 8cm 1.47GB mini DVD-R 8cm 24min / 210MB mini CD-R 8cm 50MB Business Card CD-R
• System Buffer: 128 MB (Optional upgrade to 512 MB)
• Hard Drive Supported: Up to 1TB (optional)
• Power Adapter: Input: 100 ~ 240V AC Output: +5V DC, 3.8A
• Operating Temperature: 40oF ~ 95oF
• Operating Humidity: 20% ~ 90%
• Regulation: FCC, CE, RoHS

how to reset 1-11 dvd techcom controller.
-when it is on aqnd the screen shows copy use the top arrow key to move to setup when in setup look for reset

Hello Hummer,

Please follow the instuctions below to reset the password and switch off the parental control on the Zenith DBV412.

1. Switch on the TV and DVD player
2. Switch the TV to the input for the DVD player
3. Remove any disc from the player
4. Press the SETUP key on the Zenith remote to open the on-screen menu
5. Press 2 1 0 4 9 9 using the numerical keys on the Zenith remote.
6. Press SETUP again to close the menu

This will clear any password that has been set. Now you need to switch off the parental control:

8. Press the SETUP key to open the on-screen menu again
9. Use the down arrow to highlight the PADLOCK for the parental control settings
10. Press the RIGHT arrow once to enter the parental control menu
11. Highlight RATING and press the RIGHT arrow once.

You will be asked to set a password. Enter something simple and easy to remember, e.g. 0000 then press ENTER. You will need to confirm the password by entering the same number again, then press enter again.

12. Use the UP/DOWN arrows to highlight UNLOCK then press ENTER
13. Press SETUP again to close the menu

You should now be able to insert your Across the Universe disc and play it. If you are still unable to watch the disc or you are unable to switch off the parental control feature, please let me know.

Regards,
BElectric

Introducing the NEW high-performance stand-alone CD/DVD duplicator systems. These duplicator systems are perfect for heavy production runs since there is no cooling period needed between runs. Beginners and advance users alike will find this system beneficial because of its ease of use speed accuracy and reliability. All it takes is a simple press of a button to get the duplication process started. Let the NEW high-performance stand-alone CD/DVD duplication systems serve as your solution for data backup music video duplications and much more!

• Supports DVD+/-R DVD+/-RW DVD+/-R Dual Layer CD-R CD-RW blank media standards
• Intelligent design automatically recognizes the source disc format
• ?User friendly÷ controller utilizes familiar ?ESC÷ & ?ENT÷ keys with tactile feedback for easy navigation
• System is upgradeable via firmware
• Password protection modes prevent unauthorized usage
• ?Dynamic÷ hard drive partition system saves HDD space by creating partitions according to the image size
• Allows editing of image and hard drive partition file name
• Fully stand-alone system - No computers needed!

before remove all the power plugs to all dvd drives and just let the controller plugged to power dose it works the display if yes try to connect one by one the drives and check the controller display till its ok and then may be one of the drive is defective.if still the same try changing the powersupply .
thanks

The only place to get them is by obtaining other complete models as spares donors. Spare parts are long discontinued, and as most Zeniths are completely without resale value and there are so few remaining users nobody is able to make a viable business out of breaking them for spares.

You don't have to pay for a donor, almost every Zenith and Praktica I've ever owned has come from my local FreeCycle and Freegle groups and the rest cost almost nothing from boot sales and charity/thrift shops.

It probably needs the convergence circuit repaired by a qualified technician.