Print 2side
If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
SOURCE: how to redirect lpt print to canon lbp-3000 printer
The LBP-3000 is a GDI (AKA Windows-only) printer, accordingly with its Specifications, so, there's no way to drive it simply redirecting the DOS data flow.
You may want to have a look at Printfil to enable DOS printing to USB/GDI printers
If you're the original Fox programmer, you may also find this article useful: How to print from Clipper DOS to any Windows printer (well, it was written for Clipper, but Clipper and Fox are pretty similar)
Hope this help.
Regards,
Davide
SOURCE: Canon Printed LBP 5200 Error Code E000
This error indicates fuser error, its not heating up.
SOURCE: Print back to back with Canon LBP 2900
If the printer does not support double sided printing, you need to take the printed page and put it back into the paper tray upside down to print on the other side of the page.
If you have a document several pages long then you need to print a page at a time. The odd page on one side and the even page on the other side.
SOURCE: wat is the option for printing on both sides in canon lbp 2900b
go to printer properties then printer preferance there check any options is there for printe in both side ........ and check your printer heaving the options to print in both side................
89 views
Usually answered in minutes!
×