The white cover will not release at the back. Are there screws in the blind holes?
If your Dell Printer isn't working appropriately or you're confronting specialized issues setting up your printer and you need proficient expert officials, this is the point at which we step in.
Dell Printer Customer Care Phone Number +1-833-260-7367
we have given you the best dell client service. at the point when you confronting any specialized issues in dell printers. In the event that you and your companions need and approach the best for dell printer support service, you just need to
https://easysupportnumber.blogspot.com/
Depends what you need to get at though. HP don't let general public get their service manuals, but if you add info on what you need to deismantle somone might be able to help
Ron Worth,
Dell does not have any disassemble instructions for the printer. You can click the link below for viewing the online manual.
Dell 948 AIO Printer
http://dell.to/1vAFZ3R
Thank You,
Dell-Jesse L
Dell Cares
Dell Social Media and Communities
SOURCE: Dell 948 wireless printer
hi,
u need to have wireless internet connection, first uninstall the printer sw, while reinstalling choose wireless install, follow inst, connect the printer, configure wireless adapter by choosing the correct wireless nw and by entering the security key(WEP, WPA), if wireless adapter not detected then, unplug all cables from back of printer,removed wirless adapter, press power button for 20 secs without any cables connected, connect cables, restart printer, connect the wireless adapter, u will get msg nw card detected, then try reconfiguring by entering the correct keys, in case if u dont know the security key contact ur internet service provider, once correct details are entered it will configure successfully, unplug usb cable from printer and pc, install printer sw, issue resolved, if there is no communication then check the firewall settings, anything relating to printer give full access, restart pc, try printing,
ps: if usb cable is connected to printer the nw card will be disabled.
SOURCE: Dell All-In-One 948 InkJet Printer
This might not be the issue but I had a similar problem when I first got the printer. Open the top-( where the ink is loaded), look at the back on the right there is a small bus cable ( flat wire usually white) make sure it is pulled in all the way into the top. Be carefull as the prongs can break. This took care of my clicking clacking when the machine came on.
Good luck
SOURCE: Dell 948 printer- won't print in black and white
I had this problem. It's actually very easy to fix:
- Click Print -> Properties
- Go to "Advanced" tab
- "More options"
- Deselect "Use color cartridge for all black printing"
- Select "Use black cartridge to print black and white"
- Click "Ok"
You should be able to select the "Print in black and white" option now and stop all the frustration!
Anthony
SOURCE: refilling a dell 948 color ink cart #11
Alright, I gave in and busted open my Series 11 KX703 color cartridge
to figure out how to refill it. As Inksaver pointed out there are six
columns which ultimately lead into three ink wells the bottom two (next
to the cartridge head) are magenta, the upper right two are yellow and
upper left two are cyan. Each well has one sponge in it that soaks up
the ink. Each of the six columns has a hole predrilled in the center
of it just below the top layer of plastic (about 5/16" from the left
and right edge and 1/4" from the top and bottom and 1 3/16" (midway)
from the top and bottom for the center two holes).
When I do
it again (with a new cartridge since this one is busted), I'd drill
three holes, one lower right and the two center holes, push the metal
syringe down into the foam about midway and inject each of the foams
with new blood. If someone else tries let me know how it goes. Hope
this helps.
317 views
Usually answered in minutes!
×