I can't balance my load unless I super fill it

Maybe the pump that pulls water in?

Fill it with oil until the oil just touches the bottom of the clutch basket. hould be a little less than a quart. Don't use motor oil, unless it is Harley's Syn 3.

Sounds like a lid switch

it isnt the door lock or it would not work on the first 2 spin cycles and unless you have huge out of balance loads the door(not lid as lids are only on top loaders) interlock probably isn't at fault. i would cleanout the tub to pump trap inspect the pump for blockage and flush the discharge hose. it doesn't cost a penny to do this and has fixed many front loaders with the same problem

Items between tubs can cause the problem Service manual

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Hi is this what you are saying - 00101011 where 1 is the working light?

The out of balance switch is faulty - found r-hand corner of the machine - it needs to be serviced - could try gently pushing it back/forth to try & free the mech or it may have gone out of balance prior cycle.

could be a control board problem
call in a technician for a proper diagnosis of the fault

The close pin most likely broke the switch. Unplug the washer, remove the screws that hold the top and flip it back and remove the cabinet. with the cabinet off it is easy to replace the lid switch. Cost should be $20. to $30.
God Bless and Happy New Year.