Question about Televison & Video
I changed the setting and i want bring it back to factory settings
Do a factory reset to this TV. It will make all to factory settings.
There are two types of reset to TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight; will be better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done
Posted on Dec 14, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Speakers Shot?
Technically, the television should protect itself from doing any damage, but sometimes that doesn't happen correctly.
When you say that they sound like the speakers are blown, can you describe that sound?
If it sounds like they're blown, they likely are. It's probably about the same cost to repair the speakers (if out of warranty), than to buy an external amp and speakers.
Posted on Mar 19, 2009
This information was found on the Dynex website: (http://www.dynexproducts.com/pc-680-23-dynex-32-720p-flat-panel-lcd-hdtv-matte-black.aspx) in the frequently asked question section on page 7. If the solution below dos not work for you. You can either go to the website by copying the web address and putting it in your address bar. Once there you can use the e-mail function to talk to customer support. You can also use the Dynex customer support telephone number 1-800-305-2204 between the hours of 7am and 12 am CST. Give them the model number of your television and the problem you are having with the use of the headphones. I hope this information helps you solve your problem. How do I get headphones to work with my TV? o Connect the headphone cable to the headphone jack on the side of your TV. o The sound will be heard through both the headphones and on the TV speakers. o Press Mute to hear sound only through the headphones. o Use the volume buttons on the remote to adjust the volume level. o You must remember to press mute again to hear sound through speakers. It will not automatically come on when you unplug the headphones.
Posted on Jun 06, 2009
I had the same problem with my tv.No sound! I finally figured it out. It was the speaker wires! Once I changed them to a slightly stronger speaker wire, it worked great! I have sound to my tv and I haven't had any problems since then.
Posted on Dec 16, 2009
My sharp tv also had a green tint and resetting to facotry setting did not work, what finally worked is making sure that all cables were inserted all the way into the tv and receiver. Someone else advised this for another Tv and it worked on my sharp so it is worth a try.
Posted on Mar 15, 2010
Tips for a great answer:
Mar 08, 2016 | Canon Ds126181 Digital Cameras
Dec 13, 2014 | Televison & Video
Dec 07, 2014 | JVC Televison & Video
Feb 05, 2013 | ASUS X83VPA1 C2D253 141 4GB 500GB DVDR 6C...
Aug 21, 2012 | Apple iPad 32 GB 3G Tablet PC
Dec 21, 2010 | Computers & Internet
Aug 07, 2010 | Nokia 6270 Cellular Phone
Aug 07, 2010 | Cell Phones
Dec 12, 2009 | MSI Wind U100-016US Laptop
Oct 24, 2008 | Acer Aspire L100 PC Desktop
Feb 17, 2020 | Insignia Televison & Video
Feb 17, 2020 | Vizio Televison & Video
Feb 17, 2020 | Sharp Televison & Video
9,226 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: