How do I get camera to recognise new card. It asks to configure,I press ok, it tells me to check card.It only goes in one way.How do I fix?

If you have a computer, insert it into the card reader,l select it and format with your computer

Some cameras have a maximum limit to the capacity of memory card that can be used. Please make sure that you have the right capacity card. There is also a lock (yellow tab on the side) on SD card. Make sure that it is not in the 'lock' position.

What make and model camera? Are you sure you have an SD card and not an SDHC card?

Insert the memory card. Press the MENU button. Use up/down to highlight Setup (three horizontal sliders) and press the OK button. Use up/down to highlight "Format" and press OK.

Make sure you're using an SD card. If the card is larger than 2GB than it's actually an SDHC card and won't work in the C330.

You need to look at your image storage settings. Press "Menu", "up/down" and "OK" to choose "Image Storage"; is it set to "auto" or "internal"?

If it's set to "Auto" then there's some reason that it's not recognising your memory card. You should format it. Press "Menu", "up/down" and "OK" to choose "Format" and then select the memory card.

If it's set to "Internal" then you need to set it to "Auto". Then it will use the memory card if it's inserted. (Take the card out to access the photos in Internal Memory.)

Formatting the memory card according to rhe camera's supported format should fix this. If after formatting and did not work, it means that the memory storage device is faulty. You have to replace your memory card with a new one to make take and save pictures again.

You could try updating the firmware so that your camera recognises your new card. This camera came out before larger size memory cards were available so it's probable that the original software ( firmware) in your camera does not recognise it.
Firm ware updates for this camera were available for this camera a while ago on the fuji website. Your manual should tell you how to update the firmware. If it is still available online it should also tell you how to update

If you look at the top right of your camera screen when reviewing pictures you should see the frame count. As yours is reading "Frame number full" the count should be reading 999.9999 so you need to reset to 100.0000. How to do this is posted in my tips section of my profile under "THE ONLY WAY I KNOW HOW" I have pasted the section below.
Cheers

FRAME NUMBER FULL!!

If you get this message on screen then your counter has reached 999-9999 and the camera will not take anymore pictures until you reset the counter to 100-0001.

To do this follow the instructions in your manual or read on my friends...

Firstly, make sure you have a picture card inserted into your camera and you have saved any pictures on it to your pc because you are about to format the card inside the camera and you will lose any pictures you have stored on there.

Ok. turn your camera on and press the menu/ok button and select "SETTINGS" from the menu.
Scroll through the menus until you find FORMAT. Select this and you will be asked if you would like to continue. Select OK.
Depending on how large your card is (16mb - 1,2 gb etc) will determine how long this will take but it's not very long.
After you have done this your card is now wiped clean of memory and has been formatted to be used for your cameras software.

Next, select FRAME in the SETTINGS menu and set your camera to RENEW and press OK.
Now come out of your menus and take a picture.

Review the picture taken and check the counter reading in the top right of the screen. It should now read 100-0001. The counter has now been reset.

Now go back into your menu and select SETTINGS again and scroll down to FRAME once again. Set this back to CONT (continuous) and press ok. Your camera should be reset and you can now use it.

Note: If you have more than one card you will have to reformat each card because the camera will store and recognise the frame numbers stored on the card and continue using them rather than set them to 100-0001 or will open a new folder on your card and start using this as the new one thus taking up more space on your card reducing the number of shots you can store on it

get small needle nose plyers and bend it back