Question about Polaroid 3211TLXB 32 in. LCD Television

1 Answer

Polaroid 3211-TLXB solarized / negative image

Hello,

I got a broken TV from a friend.
When I turn it on, I see mostly a white image and some movement (sound works perfectly fine).
I would say the image looks likea negative (black becomes white) and very bright, rather than solarized.

Would replacing T-Con be enough or should I buy a whole new main board?

T-Con:
http://www.shopjimmy.com/philips-996510009692-t-con-board-component-repair-kit.htm

Main board:
http://www.shopjimmy.com/polaroid-899-ke0-if3212xaph-main-board-for-3211-tlxb.htm

Or is it something else at all, like a power supply or a backlight inverter?
Do I need a solder iron to replace the T-Con? Main board seems easy to replace.

Thanks!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 14 Answers

Just replace the T-Con board and you dont need any soldering at all. JUst be careful for the flex connector.

Posted on Jan 20, 2015

Testimonial: "Will do. Thank you, Jorge!"

  • Its Me Charlie
    Its Me Charlie Jan 23, 2015

    You are Welcome feed me back what happen next. Goodluck !!

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My polaroid 3211-tlxb tv wont power on


Fault in the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Mar 24, 2015 | Polaroid Televison & Video

1 Answer

Polaroid 3211-TLXB has funny colored picture quality. Turns on and off fine and sound is fine.What could be the source of the problem??


Sounds like T'Con board fault.
If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Aug 30, 2014 | Polaroid Televison & Video

1 Answer

I have a Polaroid 3211-TLXB -It starts up fine-everything works great - then after 10-15 minutes it freezes + picture goes to crazy grey/white lines + volume goes to maximum-won't turn off-have to unplug -...


hi there, this may helps you a bit. Try to unscrew the back casing. visual check the power supply section. If you notice some electrolytic capacitors are bulgy or bloated, it needs to be replaced with same value and type. Felt the power transistors which one really heats up. Over heating of electronic components or part do affects the pictures. this also need to be replace. doing preventive repairs can extend the lifespan of your TV.
Adding exhaust fan may also lessen the heat builds up on the board. Proper ventilation also helps in the performance of the TV. If this do went well maintain the fan.
Please vote and rate. Good day

Mar 11, 2011 | Polaroid 3211TLXB 32 in. LCD Television

1 Answer

Hi Guys I have a 32' HD Widescreen LCD TV 3211-TLXB, The TV goes on ok but I have a line down the middle of the screen, on the right the reception is ok on the left side the tv seems to be loosing the...


its possible its coming from the digital board which you can get a a whole to exchange its around 400.00 or so or its the lcd panel which is as much as a new tv if you have a servicer there for polaroid you might talk to them

Oct 31, 2009 | Polaroid FLM-4201 42 in. LCD Television

1 Answer

VGA shut down


call Polariod
replace 'box'
(their description, not mine)

May 07, 2009 | Polaroid 4241-TLXB 42 in. LCD Television

2 Answers

I would like some help with my tv


My Polaroid TV 3211 TLXB (2007) was working fine, turned it off and now won't power up, volts on power supply are normal, red light is on. Control boxes are avaiable. Could this be the most likley problem and are they interchanable with other similsr sets. ? Thanks for any help

Feb 10, 2009 | Hitachi 55HDT51 55 in. HD-Ready Plasma...

1 Answer

Lost remote


what kind of universal remote are you trying? They're all different

Sep 12, 2007 | Polaroid 3211TLXB 32 in. LCD Television

Not finding what you are looking for?
Polaroid 3211TLXB 32 in. LCD Television Logo

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6063 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...