I have a KM Magicolor 1600W.When I try to print multiple pages the printer prints one page and then the error light flashes and the printing job stops.I push the clear button and the print starts agai

SOURCE: Last page of printing stops 3/4 through the page.

Try cleaning your heads with appropriate solution. Then, cancel all print jobs. Try again. If it does the same i would turn it off, inplug all the cables, replug all and turn on. Try again. If still no good, completely unistall printer then reinstall it. Try once more. Good luck

SOURCE: printer only prints one page of multiple page document

hi..

You may try to change the spool data format:

1. Click on "Start," "Control Panel," "Printers and Other Hardware" and "Printers and Faxes."

("Start," "Control Panel," "Hardware and Sound" and "Printers" for Vista...)

2. Then, right click on the Lexmark printer icon and left click "Properties."

3. Either on the "Advanced" tab or the "General" tab for some models, there is a "Print Processor" button, left click it.

4. This is the spool format setting. Under "Print processor" it should be set to "Lexmark *** series print processor." Next, under "Default datatype," select "NT EMF 1.008."

5. Click "OK" and exit back out to your desktop.

6. Try printing again.

Konica Minolta Error Codes and Solutions

• 210 Answers
• Posted on Sep 03, 2009

SOURCE: Error light flashed when trying to print with Magicolor 2400W

Start the Konica Minolta Status application and check the error, you should get more info there.

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

Seeker5211

• 1089 Answers
• Posted on May 07, 2010

SOURCE: LP2844 printer stops after one page with out of paper error

Did you try to reload the labels. Pull the labels out and clean the paper path

SOURCE: Error Message: load the correct paper cassette: A4

Hi,
check under printer driver, paper size.Usually the default paper size iz ltr. change it to A4 if you wana print on A4.