I am buyind a gn2020 headset with amp I am looking for the code

have to make sure the transmitter frequency matches the headphone reciever frequency.. like a wireless telephone.. the base has to match the handset the same frequency..say 2.7 mghz or so as an example..if it dont it wont work,. they arent compatable.. this may also be able to be done at the dealer..they might be able to change the headset out..

Hi, In some states, hands free driving is the law. In order to avoid a ticket you need to talk on your cell phone with a bluetooth headset or speaker or with a headset that attaches directly into the phone. Bluetooth headsets are popular for this and other reasons but connecting it to your phone can be confusing. Here are some steps to help you connect your bluetooth device to your cell phone.

Instructions

Things You'll Need:

* Bluetooth headset
* Bluetooth capable cell phone



Read the owners manual for your bluetooth device. You will need to find the code to pair your headset to your phone. This code is usually 0000 (those are zeroes) but verify before you proceed.


Enter your bluetooth option on your cell phone. These can be found in your menu under "bluetooth," "connections," "settings," or something similar.


Turn on your bluetooth headset and put it in pairing mode. Pairing mode means the bluetooth is ready to be found by your cell phone. To pair your headset, follow the owners manual for your specific bluetooth model.



Select "add device" or "search for new device" from your cell phone. Your cell phone will then search for your bluetooth. Once it is found, or discovered, you will need to enter the pairing code (most likely 0000, check your manual to verify).


Select "connect" to finalize the connection if the bluetooth headset didn't connect automatically after the pairing code was entered. Make a test call with your bluetooth in your ear to ensure it is connected properly.


Hope it helped.
And please don't forget to rate me...

Thanks and have a nice day...

First try '0000' (four zeros), which happens to be the most commonly chosen code by the headset manufactures. If it doesn't work, switch to '1234', instead. If it keeps failing, try '8888', then.
Hope one of these codes might suit your needs.
Regards, Carlos

No. It's a programming item and a code or softkey.

The user connects the modular headset to the handset jack on
the telephone leaving the handset in place. The ON/OFF
button on the Digital Telephone is used to initiate and end calls
while using the headset.
To activate Headset Mode:
Dial [634] on the dial pad,
-or-
Press preprogrammed HEADSET MODE button. LED lights
steady.
To deactivate Headset Mode:
Dial [634] on the dial pad,
-or-
Press the preprogrammed HEADSET MODE button. LED
extinguishes.

While Headset mode is active, the ON/OFF button
activates the headset and disables speakerphone
and intercom call announce operation at your
station.
To install the headset, see the Installation Manual.
Station must be programmed in database
programming for headset operation before the
flexible button can be programmed.

Carl

The pairing code is simply 0000. It is written in the instructions manual.

Headset mode requires a button. In addition, the speakerphone needs to be disabled in admin programming.

If you need a copy of the instruction page, I can send you a pdf. [email protected]



Pairing your headset and cellular telephone:
1. Ensure that the headset is off.
2. Press and hold the multifunction button until the indicator light
turns on in blue (approx.8 seconds).
3. Set your Bluetooth-Compatible Phone to discover the headset by
following your phone's guide.
4. Typically, the steps involve going to a "setup"connect" or
"Bluetooth" menu option on your phone.
5. Select the option to locate, find or discover Bluetooth devices.
6. Press and hold the multifunction button on the Wireless Headset
until your cellular phone locates the device.
7.Your phone will find "-PBH-8W" and ask if you want to pair with it.
Confirm by pressing Yes or OK.
8.Your phone may ask for the password to the headset. Enter
"0000" (four zeros) for the code or passkey
9.Your wireless device will operate up to 30 feet from the wireless
telephone.

TECHNICAL ASSISTANCE:
Contact GNBI: [email protected]
Telephone # 1-800-541-GNBI (4624)
Reference # PBH-8W

Your phone may not be set up to use a headset. You need to look into programming for headset mode. If this is helpful, please post as such.

I have the 8 button phone and if you hook up your headset the right way you just have to press the line/feature access key all the way to the right instead of picking up the receiver. Keep the headset on all the time and just press that button to answer or hang up the calls. It works great! ( I have the Dterm80 telephone)