Question about Frigidaire Dehumidifiers

1 Answer

The F2 code is on in the humidity window of my Frigidaire dehumidifier? Not in manual. What does this mean?

Posted by Anonymous on

Ad

1 Answer

  • Official Brand Answer
  • 2,267 Answers

Good Morning friend, thank you for your inquiry!
I see that you are having trouble with your Frigidaire dehumidifier displaying an error code of "F2". Typically, an "F2" error code stands for a miscommunication error. This could be a possible problem with a sensor or control panel. I would suggest performing a reset and that can be completed by disconnecting the power from your dehumidifier for roughly ten minutes. If you are still under warranty I would recommend contacting your manufacturer to see if any additional assistance can be provided. Hopefully this is helpful. -Matt

Posted on Feb 16, 2015

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
reddyanantha

anantha reddy

  • 205 Answers

SOURCE: F2 ON THE DISPLAY / WILL NOT RUN / MODEL FDB30R1

hello sir/mam
this is because of the error in the programme so please switch OFF for 1 mint and switch ON then see the display.

Posted on Oct 08, 2009

heatman101

D. Floyd Kolb

  • 43501 Answers

SOURCE: Recently bought a Frigidaire Dehumidifier four

Hi,
There are many reasons why a dehumidifier willnot work or collect water.
Here is a tip that I wrote to help people to figure out what is going wrongwith their dehumidifier

Dehumidifier is running but no water is in bucket

heatman101

Posted on May 27, 2011

Jerry

  • 3 Answers

SOURCE: Frigidaire Dehumidifier gives F2 error code and no longer runs.

F1 is room temperarure sensor error. F2 is tube temperature sensor error.

The room sensor usually is located in the front of the condenser. The tube sensor is usually plugged in a tube near the condensor.

The tube temperature sensor (thermistor) should be about 10K ohms.

Posted on Jan 12, 2013

Jerry

  • 3 Answers

SOURCE: Frigidaire dehumidifier error code F2

F1 is room temperarure sensor error. F2 is tube temperature sensor error.

The room sensor usually is located in the front of the condenser. The tube sensor is usually plugged in a tube near the condensor.

The tube temperature sensor (thermistor) should be about 10K ohms.

Posted on Jan 12, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Frigidaire 50 pt dehumidifier model FDB50R1has an error code of F2. Means?


First, I'm not a Frigidaire tech.
* Check your warranty. Call for service.
* Contact (note Live Chat link); https://www.frigidaire.com/Owner-Center/Contact-Us/
*** following is for information only ***
* Checking basic problems; https://www.youtube.com/watch?v=SXJrVGP_Ixs
* Review; https://www.youtube.com/watch?v=BbwIEU3zlG8
Aloha, ukeboy57

May 28, 2018 | Frigidaire Dehumidifiers

1 Answer

My frigidaire dehumidifier isn't not dehumidifying .is the warranty still good


Good Morning Friend,

I understand your Frigidaire dehumidifier, model# LAD704TDL, is not dehumidifying. I also see that it is blowing hot air, no water is coming out of the hose, and the humidity stays at 80%. I suggest contacting the manufacturer directly, to see if your appliance is in warranty, and they should be able to point you in the right direction. Hope this is helpful.

-Best Regards-
WP

Jun 29, 2014 | Frigidaire Dehumidifier LAD704TDL

1 Answer

What are the codes. i get co as a code. itruns but will not remove the humidity


CO just means it is in continuous mode, that is not a fault. It may take quite a few days to settle the humidity.
The codes are AS or ES which indicate sensor faults

Jun 21, 2014 | Frigidaire FAD704TDP Dehumidifier

1 Answer

I cant change humidity levels


Hi Ra Ma,
After you have set the desired humidity, the readout will display the actual room humidity. It has a built in hygrometer which will be on the display while it is running.
You change it and it shows the actual levels.

See page 5 on manual.

http://manuals.frigidaire.com/prodinfo_pdf/Edison/2020266a0180en.pdf

Mar 02, 2014 | Frigidaire 70-Pint 2-Speed Dehumidifier...

1 Answer

Frigidaire dehumidifier has a F2 error and will not operate


Hello - Typically error code F2 indicates a sensor failed has occurred on the dehumidifier. You may want to contact your manufacturer to verify if the part is available and can be replace. Some do, some don't. Also confirm if the unit has a limited warranty on such concern.

Oct 20, 2012 | Whirlpool Dehumidifiers

1 Answer

Recently bought a Frigidaire Dehumidifier four days ago. Ran it for 3 days on the co setting as the manual instructed. When I set the humidity level, after about 5 minutes it shuts down...does not come...


Hi,
There are many reasons why a dehumidifier willnot work or collect water.
Here is a tip that I wrote to help people to figure out what is going wrongwith their dehumidifier

Dehumidifier is running but no water is in bucket

heatman101

Jan 21, 2011 | Frigidaire FDL25P1 Dehumidifier

2 Answers

Frigidaire Dehumidifier gives F2 error code and no longer runs.


F1 is room temperarure sensor error. F2 is tube temperature sensor error.

The room sensor usually is located in the front of the condenser. The tube sensor is usually plugged in a tube near the condensor.

The tube temperature sensor (thermistor) should be about 10K ohms.

Aug 31, 2009 | Frigidaire FDL45P1 Dehumidifier

Not finding what you are looking for?
Dehumidifiers Logo

Related Topics:

716 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dehumidifiers Experts

Alan Chouinard

Level 2 Expert

52 Answers

Nestor Dede

Level 1 Expert

21 Answers

Your Consultant

Level 3 Expert

811 Answers

Are you a Frigidaire Dehumidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...