I have the radio code for my Bose radio/cassette in my ML320 but i don't have the instructions to input the code. Can you help?
Does your radio ask for the code when you turn on the ignition key. If you see _ _ _ _ or **** you should enter the code using the pre set numbers for your radio, ie, first code should be entered using the first pre set key on the radio ( number one ).
Followed by the second code number being entered using the second pre set button and so on until all of the code is entered.
After entering the full code the radio should accept, if not enter code again and press the next pre set key following, ie, if the code is 4 digits, press the fifth.
Hope this works.
If all this fails most garages will set the security code for you for a small charge. Make sure you take proof of car ownership otherwise they will normally refuse to reset the code. This is to foil theft.
I have mercedes 300e and i dnt know the code number
What is the answer to the above proble from jwrech?
Thanx! worked and i put security code in !!!!
With the instrustion wait, if this is the first time then you might wait for 5-10 minutes if you have input it for three times then you may wait for about an hour. just let it be on till the COde is written again.
On ml320 if you enter incorrect code 3 times it locks the radio out.solution is to to leave the radio on and 1 hour later it will revert to asking for the code input again
5,667 views
Usually answered in minutes!
Thanks, The word "CODE" appears and after i enter the 5 digit code the first number that i had entered flashes. I don't know what to do after this. Should i enter the code again or do i press some other button or combination of buttons? Thanks
I have this same problem on my ML320, except that my radio is stuck on "wait" for the last 3 days - any suggestions on how to reset??
i need the radio code for my Ml 320 mod2000 with with Vin of 4jgab54exya149423
i Have a 1995 300E 2.8 and the radio keeps saying WAIT, is there any way to restart this, or do i have to wait?
×