My printer has been working fine and suddenly the green light is on for a few seconds then it goes to yellow flashing, I have tried switching off, rebooting and even re installing all to no avail can any one help?

A fix from a forum:

Procedure 1 We found this procedure to work for the Stylus Photo 1270 type printer, and understand that it also works for the 870 range and even earlier models like the Stylus Color 740. The error is indicated on these printers by all four lights on the printer flashing. Even if you press the power switch on the printer, the lights continue to flash, and the printer does not turn off!

1. Turn off your printer, ensuring that the print head is at it's home location and locked in place as normal;
2. Power off the printer at the wall or by removing the power cable, for at least 20 seconds;
3. When you restore power to the printer at the wall socket or by reinserting the cable, if the lights come back on straight away, the printer's power switch was 'on' - switch it off and return to step 1;
4. Hold down the paper-feed button and the button with the ink-drops next to it, and then turn on the printer, still holding the buttons down;
5. When the paper-out LED flashes, release the buttons;
6. Press and hold the Cleaning button, until several lights flash - this will take a few seconds (i.e. then release the button);
7. The printer will now attempt to reset, including resetting the EEPROM memory and running a short (about 10 seconds) cleaning cycle.

Procedure 2

1. Turn off your printer, ensuring that the print head is at it's home location and locked in place as normal;
2. Hold down the paper feed button only;
3. Turn on the printer;
4. As the paper feed light starts flashing, release the button;
5. Immediately hold down the ink-drops button for some 10-20 seconds or until the printer springs into life;
6. Allow printer to complete it's processing, then turn off for a few seconds, and back on again for a newly working printer!

Procedure 3 - for 1290 and possibly 890 printers 1290 printer with green (power / data) and red (ink / paper feed) lights flashing alternately:

1. Switch off printer with panel switch;
2. Switch off printer at mains switch - leave off for 20+ seconds;
3. Hold down roll feed and sheet feed buttons;
4. Switch on at mains;
5. Switch on at printer panel;
6. Continue to hold down roll and sheet feed buttons until both green and red lights flash together in synchronisation, not alternately;
7. Switch printer off and then, after a few seconds, on again at mains switch;
8. When red and green lights are both flashing in synchronisation, release the roll and sheet feed buttons;
9. Press and hold down the ROLL FEED button (the one at the extreme left) and keep it down until the machine finishes whirring, cleaning etc and the green light comes on steady;
10. Release the roll feed button and all should be well.

Depending on what type of printer you have:

Procedure 1 We found this procedure to work for the Stylus Photo 1270 type printer, and understand that it also works for the 870 range and even earlier models like the Stylus Color 740. The error is indicated on these printers by all four lights on the printer flashing. Even if you press the power switch on the printer, the lights continue to flash, and the printer does not turn off!

1. Turn off your printer, ensuring that the print head is at it's home location and locked in place as normal;
2. Power off the printer at the wall or by removing the power cable, for at least 20 seconds;
3. When you restore power to the printer at the wall socket or by reinserting the cable, if the lights come back on straight away, the printer's power switch was 'on' - switch it off and return to step 1;
4. Hold down the paper-feed button and the button with the ink-drops next to it, and then turn on the printer, still holding the buttons down;
5. When the paper-out LED flashes, release the buttons;
6. Press and hold the Cleaning button, until several lights flash - this will take a few seconds (i.e. then release the button);
7. The printer will now attempt to reset, including resetting the EEPROM memory and running a short (about 10 seconds) cleaning cycle.

Procedure 2

1. Turn off your printer, ensuring that the print head is at it's home location and locked in place as normal;
2. Hold down the paper feed button only;
3. Turn on the printer;
4. As the paper feed light starts flashing, release the button;
5. Immediately hold down the ink-drops button for some 10-20 seconds or until the printer springs into life;
6. Allow printer to complete it's processing, then turn off for a few seconds, and back on again for a newly working printer!

Procedure 3 - for 1290 and possibly 890 printers 1290 printer with green (power / data) and red (ink / paper feed) lights flashing alternately:

1. Switch off printer with panel switch;
2. Switch off printer at mains switch - leave off for 20+ seconds;
3. Hold down roll feed and sheet feed buttons;
4. Switch on at mains;
5. Switch on at printer panel;
6. Continue to hold down roll and sheet feed buttons until both green and red lights flash together in synchronisation, not alternately;
7. Switch printer off and then, after a few seconds, on again at mains switch;
8. When red and green lights are both flashing in synchronisation, release the roll and sheet feed buttons;
9. Press and hold down the ROLL FEED button (the one at the extreme left) and keep it down until the machine finishes whirring, cleaning etc and the green light comes on steady;
10. Release the roll feed button and all should be well.

MY philips tv model number 55PL9773/17 WAS TURNING OFF THE SCREEN AND LEAVING THE AUDIO ON FOR ONE MINUTE. THEN THE YELLOW LIGHT STAYED ON. THEN THE LIGHT TURNED OFF. thEN I TURNED ON WITH THE REMOTE AND THE YELLOW LIGHT TURNED ON AND A FEW SECONDS LATER CHANGED TO THE GREEN LIGHT AND THE TV TURNED ON. AFTER A FEW MINUTES, BETWEEN 10 AND 30 IT DID THE SAME THING. NOW IT IS OFF WITH A BLINKING RED LIGHT PERMANENTLY ON. TO TURN IT OFF I HAVE TO UNPLUG IT FROM THE WALL. I REPLACE THE LAMP A FEW WEEKS AGO AND IT IS FINE.

i think you may have yellow light of death ylod ps3 overheating

display comes on works 15 seconds no power just leds green

Hi,

when the yellow led flashes is never a good signal... you should check the manual's printer to find out the error code meaning "4 yellow flashes and 1 green)
Usally it's the waste tank that is full, in this case you need to:

1. Push “resume” for 5 seconds for canon IPXXXX.
   
2. Push Power switch then remove power cord.
3. Insert plug power cord while pressing “power switch” at the same time.
4. Push Start/reset by step 2 continue Wait display shown “0′
5. Push + change display from “0′ to “1′
6. Push color button 2 times
7. Push Power switch again , Printer will print 1 page
8. Open cover
9. Unplug power cord
10. Take out ink cartridge #40 and #41
11. Insert plug again
12. Push power switch
13. Open cover (scan cover)
14. Insert ink cartridge #40 and #41 again

Hi ,


First off all u switched off the printer and on switch off mode press the green button and on pressing the button switch on the printer hold that button for 5 seconds and then release the button whenever u realese the button the printer start migrating . After migrating if the printer have same problem then u reinstall the printer driver and again reinstall the driver, after reinstalling the driver the printer will working fine .

it is fried and needs repairs if you break the seal by trying it yourself you void the warrany

Yellow light indicates a "non recoverable error" try bypassing your surge suppressor and connect your printer to other ac outlet then try again if you still have a yel light contact support at 1 800 421 6699. If not try removing and reinstalling the printhead

You need to replace your main board.

I’m happy to assist further over the phone at https://www.6ya.com/expert/lou_afa492c634393790