I have a Kenmore series 600 model 110 26632701. I need to look at the drum it seems to have a support loose tub leans when washing clanging when in motion. how do I get front off to look. thank you

Well, based on my experience, it seems to be an issue of suspension rods which supports drum or it can also be an issue of drum belt or bearings.

You can schedule a service by contacting Sears Home Services via chat. Please login to www.searshomeservices.com. They will help you to schedule a service.

Is it a front loader? You may have something stuck between the tubs or it may be a broken "paddle" One of the plastic baffles that move the clothes around in the tub. they should all be tightly against the tub.

is it a top loader or front loader ime trying to answer this q from Belfast n.i

Hello Jye,
It does sound like either the clutch is bad or the Motor coupler is bad. I have included a video showing how to replace the coupler Kenmore Washing Machine Model 110 22642100 11022642100 110 22642100 Parts
The coupler is about $18 and the Clutch is about $48
Good Luck!
Rich Lilja

Could be a loose basket nut, or on the bottom tub support there are a few springs that help locate the tub. One of the springs could have come off or broke.

What is the model number of the unit?

worn out drum bearings-mike

Check the Vibration damper rods to be sure that...
1. They are there and mount is solid.
2. If they are broken in 1/2.
3. The plastic knuckle mounts are not missing/broken.
4. There is oil in the shock absorber/spring section of the rods.

Also - there are suspension springs on the bottom of the tub that could be broken and/or missing.

Replace/repair as necessary.

IF THIS IS A BRAND NEW INSTALLATION - be sure you hav removed the basket shipping pins (4) that secure the tub during shipping.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

I washed pillows in my washer and now the tub leans to the right front. And my dryer needs to have the lint cleaned out of it. How do I do this. They are Kenmore 80 series washer and dryer

Check the shocks on the bottom of the drum. I had the same problem and had to replace the shocks because they were broken in half.