How will l remove this erro code in lr cannon 2318l it showing e000 100 0000

Dear Its the problem with LSU (laser scanning unit).
Pl. do as.
1-clear error list in service mode.
2-check all harness to LSU.
3- Clean all optical path, ie. lenses inside LSU with lint free cotton cloth only including polygon motor.
4-cross check LSU
5-Cross check DC-CON card.
Thanks.

Dear
I am not sure with this model for this error code. But the counter may checked for its continuity it might have open. There are two electro-mech. counters.
Thanks.

cannon iR2200-3300
error code 000000-0000
how to solve the proble

Please give me advice how to repair E000019-0002 error in IR 2318L. After printing about 20 pages I got that error code. Please reply me.

My canon ir 2318L shows error**E000007-0000 how can i solve this problem

give me the solusion of error code 225 of machine cannon 7086
reply plzzzzzzz

code LR is a Locked Rotor on the motor,but you say the motor runs,then you need to open the top cover by removing the screws inside the detergent cover after unplugging the unit,inside ther should be a tech diagnosis sheet to help you diagnose your problem,just from this its either a bad tach sensor or pick-up coil on the motor that senses the motor speed during all washing cycles,if this sensor is bad it will show up as if the motor isn;t running or a LR code

Err 5 is the code shown when the flash isn't correctly released.  Try cleaning the area around the built in flash and make sure it can pop up freely

Call the serves and must support you
or cheak un cannon site what the error

use normal cycle instead of clean just follow say instructions ..lr is code for remove clothes from tub for clean cycle problem even with no clothes they still show code ..it's a program problem that whirpool is aware of last i heard they were working on solution but instructing cust to just use normal cycle instead