How do I program an LG universal remote to work with my verizon cable box?

Check by placing the verizon cable box some where else . Your tv is sensing the remote signal of the verso remote and it taking it as a command for standby.
If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

The two possible reasons are:

1. None of the codes are correct for this model.

2. The remote infrared receiver in the set is bad.

(maybe the reason the other person got rid of the set?)

There are some ways around this depending on how you hook up and what you have for signal:

If a box (cable or sat) is connected to one of the sets of audio/video jacks on the set--switch to that input and change channels etc with the box!

Use the box remote for functions like channel and sound etc.

If Verizon is your cable provider, I assume you have their cable box - unless you have TiVo. I also assume that, either way, you should have been given a corresponding remote, and not have the need to use a universal. Finally, I am assuming that a "Pandigital KTC" is a television. If it isn't, excuse me and disregard my answer. If it is, get a remote from either Verizon or TiVo, whichever is the case.
Good luck. . .

Hi.

You'll need to download and install the Harmony remote software. You can get it at http://logitech.com/myharmony and click on "Downloads".

Once you have the SW, create an account and follow the fast easy setup to get your remote working.

Hope that points you in the right direction. :)

The best code I could find was "007"

"210" kind of works, but can't compete with Mr. Bond.

After programming "007", if there are any features of you FiOS remote that do not work on the HK AVR 354 remote, simply follow the HK AVR 354 manual instructions to "learn" additional commands. See the last paragraph on page 31 through letter "e" on page 32.

Cheers,
Jeremiah Pattison

Keywords: Harman Kardon AVR 354 remote code to control FiOS DVR PVR STB cable box QIP 6416

go and buy a universal learning remote and you will be able to program all your devices on the remote, works very nice. as far as the lg remote, dont think there is a way where u can program your cable and dvd onto the remote and I have lots of experiences with LG

Hi,

Pls post back with the brand and model of the universal (replacement) Remote Control or what remote control you would want to use with the Zenith DTT900 Digital-to-Analog Converter Box.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Target sells a GE Universal Remote Control, 5 Device with learning feature. I can't say if it works with your Verizon DVR, but its code for the Akai LCT3285TA is 1139. If you have the Verizon's remote, you should be able to use the learning function to make the GE control it - that's if the GE doesn't have a built in code that will work for this DVR.