Re: I get a reading "Err 1" and it will not run at all.
Try recalibrating your machine. Use the owners manual for the steps. This might work. I had an L5 error and it wouldn't run either. Recalibrating fixed the problem.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If your blood pressure mahine is like those fro Walgreen's:
Walgreen's Blood Pressure Error Readings.
Error Codes
Err 0 No pulse is detected
Err 1 Inflation rate is too low
Err 2 Systolic reading unattainable
Err 3 Cuff pressure is too high
Err 4 Diastolic pressure is outside of operation range
Err 5 Cuff deflated too fast
Err 6 Cuff deflated too slow
Err 7 Systolic pressure is outside of operation range
Err 8 Overall pressure is outside of operation range
Err 9 Cuff is unable to inflate to the necessary pressure level
I can think of a few possible issues:
1. SD card not formatted (format it in the camera)
2. SD card bad. try another one.
3. SD card bigger than camera can handle.
Error 1 - "disc is dirty, damaged, or is inserted upside down"
I quote other solution comments:
I've been getting the Err 1 and Err 3 for a while now, my headunit needs replacing but I haven't had chance yet...
I've found that the cold weather makes it worse as the CDs get that cold
they are covered in condensation so the CD has trouble reading them..
In my experience when you get an Err 3 it's basically knacked and needs
replacing and Err 1's can sometimes be read problems - what's the disk
like?
Mine has started giving Err 1's on brand new CD's (not CDRs) so she's probably having trouble focussing....
If the car is less than 5 years old the headunit should be covered under warranty (ie free).
Possible explanations and work-arounds based on various blood pressure
monitors..net is if it has worked religiously like mine had and this
error comes up, and the simple fixes below do not work, there is
something internally wrong with the unit..there does not seem to be any
customer reset or obvious fixes..contact the manufacturer for service..
Error Description Potential cause and remedy
«Err 3» No pressure in the cuff
An adequate pressure cannot be generated in the cuff. A leak
may have occurred. Replace the batteries if necessary. Repeat the
measurement.
Err 0 No pulse is detected
Err 1 Inflation rate is too low
Err 2 Systolic reading unattainable
Err 3 Cuff pressure is too high
Err 4 Diastolic pressure is outside of operation range
Err 5 Cuff deflated too fast
Err 6 Cuff deflated too slow
Err 7 Systolic pressure is outside of operation range
Err 8 Overall pressure is outside of operation range
Err 9 Cuff is unable to inflate to the necessary pressure level
--------------------------------------
Error No. Possible cause(s)
Err 1 No pulse has been detected. Cuff may be positioned incorrectly.
Err 2 The arm was moved during the measurement.
Err 3 Inflation of the cuff took too long. The cuff is not positioned correctly.
Readings You May See When Unit is AC Powered Display Shows Alarm Sound Unit Status Recommended Action Steady "Err" "Chirp" every Unit malfunctioning when Call KIDDE customer and flashing dot 30 seconds AC powered service at 1-800-880-6788 Readings You May See When Unit is on Temporary Battery Backup Display Shows Alarm Sound Unit Status Recommended Action Flashing dot None Normal battery-only operation - Plug in to AC as soon as unit will show reading only if it possible to conserve battery senses CO Flashing dot and "Chirp" every Unit malfunctioning when Call KIDDE customer "Err" 30 seconds battery powered service at 1-800-880-6788
Hope this helps. Manual is here: http://www.detectorsandalarms.com/images/pdf/Manual_KN-COPP-3_900-0100en.pdf
If this helps you resolve your problem, please consider giving a good rating and a quick thanks or good job.It will help me as well Thank you.
My Omron only goes up to about 165 only takes about 1/2 the time it takes to get a reading from my Samsung. For my Samsung, I use a couple of velcro straps (can buy them at electronic dept's and they sold as wire-cord wraps), and I place them so they go across the seem of the arm band and keep it tight as the BP pressure goes over 215. This solution for me is the only way I can get this machine to perform consistently. It still runs about 10 higher than my Omron, but it is consistent - and now no longer gives me "Err-1" messages. BTW - I've got an order in for the "Advocate Wrist Blood Pressure Monitor" and I'll be happy to post how it works after I receive it.
Read pages 99-101 of the manual. There are numerous err messages referenced. Some blink others only have the E of Err blink and the like, all with different solutions. If you cannot find the manual call Nikon Film 1-800-645-6687.
Possible explanations and work-arounds based on various blood pressure monitors..net is if it has worked religiously like mine had and this error comes up, and the simple fixes below do not work, there is something internally wrong with the unit..there does not seem to be any customer reset or obvious fixes..
Error Description Potential cause and remedy
«Err 3» No pressure in the cuff An adequate pressure cannot be generated in the cuff. A leak may have occurred. Replace the batteries if necessary. Repeat the measurement.
Err 0 No pulse is detected Err 1 Inflation rate is too low Err 2 Systolic reading unattainable Err 3 Cuff pressure is too high Err 4 Diastolic pressure is outside of operation range Err 5 Cuff deflated too fast Err 6 Cuff deflated too slow Err 7 Systolic pressure is outside of operation range Err 8 Overall pressure is outside of operation range Err 9 Cuff is unable to inflate to the necessary pressure level -------------------------------------- Error No. Possible cause(s) Err 1 No pulse has been detected. Cuff may be positioned incorrectly. Err 2 The arm was moved during the measurement. Err 3 Inflation of the cuff took too long. The cuff is not positioned correctly.
×