Emerson EWR10D4 DVD Recorder Logo
Posted on Nov 13, 2007

Play Back I can record fine and view recording fine from my ERW10D4. I finalize the disks and then take them into another room to watch from a different DVD player and it says no disk or disk error. I took a couple to my mom's and tried them on her DVD player and it does the same thing. Am I doing something wrong? I thought after recording onto the disk it could be taken to other DVD players to be viewed?

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Nov 15, 2007
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Nov 15, 2007
Answers
1
Questions
0
Helped
243
Points
0

Some DVD players can't read -R & -RW disks. When you finalize make sure it is in Video mode not VR mode so the recorded disk will be able to work in most other DVD players. Also some DVD players only read recorded disks rated up to 1x, 4x, 8x, 16x, or a combination of these speeds.

  • Anonymous Nov 15, 2007

    I have this unit also. It won't recognize 8x or 16x DVD disks and I am looking for firmware upgrades that allow this recorder to use newer 8x or 16x DVD recordable disks because I can no longer find 1x-4x speed disks in our area

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Can't view recorded DVD

if the movie you recorded ? was copy protected. then your dvd prob did not record
0helpful
1answer

When recording two vhs tapes back to back on one disk, it will not finalize. But, will finalize if one tape is recorded. Mind you now each tape only has one half an hour recording on them, and the disk is...

The disc requires some space for the finalizing process. Two half-hour tapes take up all the room on the disc and leave nothing for the process. You'll need to record at a lower speed.
Feb 26, 2011 • Cameras
0helpful
2answers

I cannot play burned dvd's from this system in other dvd players becahse I cannot finalize the dvd. How do I finalize?

The recording may have used all the media on the disk because you let it run until it was full.
Now, there is no room to finalize the disk.

Play this back on the machine where it was recorded while recording it to another DVD recorder..
This time, BE THERE to stop the recording.
Set the recorder to a speed that leaves at least 10 minutes extra space for finalization.
1helpful
4answers

Anything I have recorded onto DVD from TV wont play on any other machines. It will only play on this machine I recorded on. It is the same make and model mentioned here.

If you're not using DVD+RW blanks (VERBATIM work fine), then try them. DVD-RW blanks will not play on any machine but the one that recorded the disk (according to the manual.)
1helpful
1answer

Sanyo DVD recoder doesn't play if I let record run to end of disk

most dvd recorders have setting to finalize at the end of a timer generated recording, or to fianalize when the disc reaches the end and runs out of room, check for one or both of these settings in the setup menu of the recorder
8helpful
2answers

Recorded dvd's won't play on other dvd players Toshiba d-r410

You can play these recordings without finalizing them in the D-R410, but if you want them to play
in other DVD players, they need to be finalized. See pages 28 to 32 in manual. If you want to
finalize the disks you've already made, follow the directions on page 32.
0helpful
2answers

Video copied to disk but cannot view on PC or other DVD players.

This is the unfortunate thing with copying DVD's. Unfortunately when a DVD is copied only certail players will play it back. I can burn a disk on my laptop and it will play fine in the laptop and on my Sony DVD player, but my Samsung will not read it. This is why when you burn DVD's it's important to find a brand that is read by numerous DVD players. Try using the Sony disks.

Hope this helps.
0helpful
1answer

Panasonic DMR ES40v

We need to narrow down where the problem lies. Even without finalizing the disc, you should be able to play back the recording. Can you do this? If you can play back the recording, the problem exists in the finalization stage and we'll need to concentrate there. Please update this and we'll proceed to the next step.

Thanks,
Viper
1helpful
1answer

Panasonic DVD Recorder

We need to narrow down where the problem lies. Even without finalizing the disc, you should be able to play back the recording. Can you do this? If you can play back the recording, the problem exists in the finalization stage and we'll need to concentrate there. Pplease update this and we'll proceed to the next step.

Thanks,
Dan
0helpful
1answer

Can't view DVD's burned from the tv on a DRC8335 RCA DVD recorder

If you do not finalize the disc then you can not play it back. Go back to your instruction manual and look under 'setting options'. There should be a choice to 'finalize disc before ejecting'. The recorder will not finalize a disc until it knows when you are done recording, so you have to tell it somehow.
Jan 02, 2008 • RCA DRC8335
Not finding what you are looking for?

253 views

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...