What batteries does this model need, please? - Computers & Internet

Yes beeping means the rechargeable battery is worn out, or the power to the base unit is not charging and the handset is running out of charge.

The battery compartment is accessed in the bottom rear of the phone handset.

'make model (what it is)' in all questions please.

Google

make model beeping
or
make model replace handset battery
or
make model manual

..

Try http://www.batteriesplus.com/default.aspx

Without knowing the model of your Uniden DECT 6.0 phone or the country you're in, I can't tell whether they have the battery you need.

If you need further assistance then please reply to this post and specify the model of your phone and the country you're in.

HI,
Please choose 12 volts, with 60 AH. Please choose the branded one. The original battery of this car is YUASA brand. But you choose other brand like yokohama, panasonic etc. If you buy a new battery , please check orientation battery leads.
Regards, Jay

Hi,

Please give us the correct mobile model number.The number which you gaves is the model number of the battery.To Know the mobile model please remove the battery and check
Thank You

hi
its better for you to purchase a new battery from any sansui service center or sansui showroom

In order to clearly determine the fault the model of your KODAK camera is needed However I hope this will help: If your cam use AA batteries: Here are the steps for the no power problem: 1. Make sure you will install a new or fully charged battery/batteries into your camera. Please use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher). 2. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth. b. Reinstall the battery/batteries into your camera 3. Turn on your camera without the memory card. If your camera model requires the manufactures batteries: Here are the steps: 1. Make sure you will install a new or fully charged battery/batteries into your camera. 2. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth. b. Reinstall the battery/batteries into your camera. Please make sure that you are installing a fresh/ fully charged battery c. Without the memory card, turn your camera on. 3. Please test with the a different battery If you do not have access to another battery Try these steps instead: Please take the battery out of the camera. b. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the battery. If you camera doesn?t switch on you will need to order a No power repair or a new cable. In order to organise your repair or Trade up please Contact KODAK: http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

If your camera model requires the manufactures batteries: Here are the steps: 1. Make sure you will install a new or fully charged battery/batteries into your camera. 2. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth. b. Reinstall the battery/batteries into your camera. Please make sure that you are installing a fresh/ fully charged battery c. Without the memory card, turn your camera on. 4. Please test with the a different battery If you do not have access to another battery Try these steps instead: Please take the battery out of the camera. b. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the battery. If you camera doesn?t switch on you will need to order a No power repair or a new cable. An Out of Warranty repair for this model for this around 48 pounds + shipping to the repair centre. In order to organise your repair or Trade up please Contact KODAK: http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

In United States, please contact:
VTC SERVICE & MANUFACTURING, INC 
16988 GALE AVENUE
CITY OF INDUSTRY, CA 91745 
TEL: (800) 888-8990
Monday through Friday, 8 a.m. to 4:30 p.m., Pacific Standard Time
FAX: (626) 913-7599
E-MAIL: [email protected]