Unfortunately it sound like you need the PUK code for your phone. Sounds like somehow the master lock got activated on your phone or a sim card lock. And the only way to be able to use your phone will be to get the PUK code. And if that's the code they gave you tell them to do it again because somehow it's not working.
Good Luck
Ellen
SOURCE: unlock cdma verizon for to work with telus
Did you try the six Zeros? if you could post or email me the ESN Hex. i might be able to get the SPC code for it. so you could follow telus instruction on programming the phone with them.
Verizon phones could be unlocked via keypad codes. code generators, and via software. Also please post the phone brand and model.
Thanks
SOURCE: Is there any way I can get my LCD screen fixed without paying tons?
stop being a cheap *****
the best thing to do is to reprogram the phone to your sim card. to do so when your phone is on and insert right sim appears on-screen dial ##000000# this will send you to a screen with 1.view 2.edit 3. done. go to edit and change the MSID to 0000000000 (10 zeroes) this will pair your phone with the new chip. but since the hybrid 902 has both technologies IDEN and CMDA you will only be able to use the IDEN part with a boost chip. I have an ic902 flashed to use with Pocket and Boost.
SOURCE: Unlocking the Phone.
need to unlock mobile phones j
ust get in to this www.unlock-zone.com/
bcoz when i was in a situation my frnd suggest me this..really good...
SOURCE: sciphone I68, service provider ATT, GPRS not subscribed
WAP
***First Step***
1.Main menu --> Select Services
3.Select Data Account --> Select GPRS
5.Select the first entry
6.Edit the account name to whatever you would like
7.Edit APN to wap.cingular (lowercase)
8.Edit Username to [email protected] (UPPERCASE)
9.Edit Password to CINGULAR1 (UPPERCASE)
10.Edit Auth Type. to Secure
11. Save
Select Back --> Select Back
***Second Step***
Select WAP
1.Select Settings --> Edit Profile
3.Select the first entry --> Edit Profile
5.edit the name to whatever you would like
6.Edit Homepage to http://device.home
7.Edit Data Account to the Name you established in the First Step
8.Edit Connection type to HTTP
9.The IP address is 066.209.011.032 and the port number is 8080
10.Edit Username to [email protected]
11.Edit Password to CINGULAR1
Select back or done
Select Activate Account
You should now see a Black [G] in the upper left of your screen.
MMS
Select Messages --> MMS --> Message Settings
Select Server Profile
Select the first entry
Select Edit Profile
Edit Rename Profile to whatever name you would like
Edit Home Page to http://mmsc.cingular.com
Edit Data Account to the same data account you created for WAP
Edit Connection Type to HTTP the IP address is 066.209.011.032 and the port is 8080
Edit the Username to [email protected] (UPPERCASE)
Edit the Password to CINGULAR1 (UPPERCASE)
Select Done or Save
Make sure to activate the profile and you are good.
*********************************************************************
Just be Patient and make sure you double check everything you put it it has to be exactly as it says.. I just set mines up yesterday and it works fine.. Hope this helps! It took me forever to find the solution hah
60 views
Usually answered in minutes!
×