We just bought a brand new RCA LCD TV, we plugged it in and it turns on but we can't see anything. We can faintly see the setup menu but not enough to read anything.

SOURCE: Blank screen, cannot get menu to display, but sound works

Does the lcd screen have a glow to it ? Or is it really dim if u get real close to screen u can see images moving ?
it it has a glow to it you panel lighting is fine but you control board is bad. If you have a dark screen and see faint images you panel back lighting is out u can check the power with a meter at the connection to inverter board on panel.

SOURCE: TV screen went negative. Brand new TV

I would use the warranty for this problem. The part that need to be replaced can be somewhat expensive.
With the credit card statement, you can use that as a receipt.

SOURCE: Flashing Green Power Light - No Picture or Sound

try accessing tv through the remote control.

Marvin Fife

• 328 Answers
• Posted on Oct 25, 2009

SOURCE: PC plug into the TV...not working

Screen resolution is set too high on the computer. Right click desktop > Properties > Settings > Change to 800x600 then connect to TV.
OR... boot the computer while connected to the TV and it should automatically figure out what resolutions the TV can do.
-=/ Daft Tech /=-

SOURCE: green to red blinking light when plug in rca lcd

It is the capacitors on the power supply...They blew on ours...took it in a they replaced 7 for less than 100.00. Common problem with this tv because it gets hot. Hope that helps.