My iPad was "reset all setting" and now it only display an usb cable and draws an arrow to the word itunes. It is iPad 16 GB Model A1396, FCC ID: BCGA 1396 and IC: 597C-A1396 How to return it normal?

Generally speaking, you need the Apple ID to reset your iPad. iPad needs you to enter the Apple ID to switch off your account and the Find My iPhone service will be turn off. If you are using iTunes to reset your iPad, you need to enter the Apple ID when your iPad reboots.

But if you have no Apple ID or passcode, you will have to reset your iPad without Apple ID. To reset iPad without Apple ID, you need first put iPad into DFU mode and connect it to your iTunes. Your iTunes will help you to reset your iPad without entering Apple ID easily. Resetting your iPad with this method will result in wiping all the data in your iPad. The following steps will show you how to do that.

Step 1: Open iTunes on your computer and connect your iPad to the computer with a USB cable.
Step 2: After that, turn off you device. Press and hold the Home button for 3 seconds.
Step 3: Put your iPad into DFU mode: Press and hold the Power and Home button for 10 seconds. Then release the power button and keep holding the home button. When you see the Apple logo disappears, you have successfully put your iPad into DFU mode.
Step 4: When iTunes detects that your iPad is in recovery mode, you can restore it now.
Step 5: Click on Restore iPad. Then you will be notified after the reset and your iPad will take a restart.

After resetting your iPad with the guidance mentioned above, you'd better create a new Apple ID and password in time. After resetting iPad, you will get all the data swept from iPad, and you can restore the files from your iPad, iTunes backup or iCloud backup. However, you can't backup iPad to iTunes/iCloud without Apple ID before you reset your iPad. In this case, you need the third-party iOS data recovery software to help you recover lost data from iPad after factory reset without Apple ID.

http://www.leawo.org/tutorial/how-to-reset-iphone-without-apple-id.html

You need to connect the iPad with an USB-cable to a computer and open iTunes software. there you will see your iPad showing up and you can do a restore:
Restore iPad to new factory condition

You need to connect the iPad with an USB-cable to a computer and open iTunes software. there you will see your iPad showing up and you can do a restore:
Restore iPad to new factory condition

Hi Anonymous please follow these steps:

1. Make sure the iPad battery is charged above 20% ( we would recommend at least 40 - 50 %). If you are not sure charge you tablet for at least 30 -40 minutes.
2. Make sure iTunes is not running on your computer but is ready to be run.
3. Temporally disable firewalls and other security software to prevent interference with iTunes.
4. Make sure your tablet is disconnected from the dock or USB data cable that equips the gadget . Nevertheless USB cable must be plugged into your PC or MAC.
5. Make sure your PC or MAC is awake and its screen saver is turned off.
6. Simultaneously press and hold down the Wake/Sleep button and the Home button and wait until "slide to power off" screen appears. Don't do anything after its appearing, just keep holding Wake/Sleep and Home buttons until Apple tablet will power off.
7. Release the Wake/Sleep button once Apple tablet is off , but continue to hold the Home button
8. Holding the home button, connect the USB data cable to iPad. When you reconnect the USB cable, tablet should power on and you should see a message on your PC/MAC display saying that iTunes has detected an iPad in Recovery Mode
9. After you detected this message, release the home button and press OK on iTunes pop-up to confirm the restore option.
10. Do not touch iconic tablet and you computer while iTunes downloads and installs the fresh copy of firmware on your iPad. You will be notified by iTunes when iPad is successfully restored, but... in a while, you will get an message saying that the iPad isn't recognized. Don't panic. This is because all user content on iPad including activation status was erased during restoration.
11. Disconnect iPad from iTunes ,unplug from computer and turn off.
12. Turn iPad on and using iTunes activate it on any computer you have. Apple currently allows up to 5 computers to be authorized for each iPad.

You need to connect the iPad with an USB-cable to a computer and open iTunes software. there you will see your iPad showing up and you can do a restore:
Restore iPad to new factory condition

You need to connect the iPad with an USB-cable to a computer and open iTunes software. there you will see your iPad showing up and you can do a restore:
Restore iPad to new factory condition Restore iPad to new factory condition

You need to connect the iPad with an USB-cable to a computer and open iTunes software. there you will see your iPad showing up and you can do a restore: Restore iPad to new factory condition

you can restore your ipad with itunes to a previous state only if you did a backup there already before.
You need to connect the iPad with an USB-cable to a computer and open iTunes software. there you will see your iPad showing up and you can do a restore: Restore iPad to new factory condition

Turn it off when its off connect the cable that's used to charge it to a pc or laptop making sure ipad is still off hold the home button do not let go now keep it held down until you connect the cable and see a picture symbol showing to connect to iTunes as soon as you see that on the ipad you can let go off the home button if iTunes doesn,t open itself you do it it should now see an ipad in recovery mode click on restore or restore and update please note that this will erase your whole ipad back to factory settings

This is a job for an Apple Genius. You will have to make an appointment online with a local Apple store.