Apex Converter Box died

Apex Digital TV Converter Box DT250 code ' ManualsOnline ...

tv.manualsonline.com > ... > TV Converter Box Support

Nov 15, 2008 - 3 DT250 code is 0847. Was this answer helpful? Yes No. xpertwa posted an answer 10 years, 4 months ...

Digital Converter Box Remote Codes ' Codes For Universal ...

codesforuniversalremotes.com > digital-converter-box-r...

Universal 4 digit remote codes to try for your Digital Converter Box: 1903 1563 0581 5096 ... APEX Digital Converter Code = 0519. ARTEC Digital Converter ...

Remote Control Codes For APEX TVs ' Codes For Universal ...

codesforuniversalremotes.com > remote-control-codes-f...

APEX TV 4 Digit Remote Codes (Best for Universal Remotes & U-Verse ATT) 1434. 1400. 2521. 1085. 1111. 0214. 0216. 0215. 1236. 1241. APEX TV 5 Digit Remote Codes (Best for most SAT and CABLE remotes) 11531. 10879. 10748. 10767. 11991. 10890. 10889. 10156. 10765. APEX DVD Player Remote Codes. 2001. 2056. 2057. 2061. 2095. ...


BUT BETTER to buy a new remote made for it.

https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk02yqchXMQdJ7M9MZ8pX9PU5BjBoUA%3A1612477075323&ei=k3IcYLKOE8uusAWaoI-QCw&q=apex+converter+box+replacement+remote

..

Unfortunately, the RCA RCU404 was programmed in 2003 before the digital-to-analog converter boxes were released. It doesn't have a code for any brand converter box. The Apex converter boxes were listed at Amazon in 2004. See http://www.rcaaudiovideo.com/remote-code-finder/?sku=RCU404&productType=Digital+TV+Converter+Box to search for all available device codes. Change the Product Type via the drop-down menu for other device codes.

Most universal remotes code lists are limited to devices that hit the market 6 months before the remote was programmed and older devices. I wish that I had better news for you. A universal remote that was programmed later (2005 at the earliest) would be more likely to support the converter box and let you consolidate all of your remotes.

I hope this helps.

Cindy Wells

0749 HAS WORKED FOR MANY PEOPLE FOR APEX CONVERTER BOXES

Hello
Try with these codes. These codes are of universal remote control with Apex Digital.
015 226 037

TURN CONVERTER BOX ON PRESS AND HOLD SET UP TILL LIGHT BLINKS PRESS CBL/SAT THEN PRESS POWER BUTTON KEEP PRESSING EVERY 3 SECONDS UNTIL BOX SHUT OFF AS SOON AS BOX SHUT OFF PRESS ENTER BUTTON MAKE SURE YOU PRESS ENTER RIGHT AFTER BOX SHUT OFF DO NOT PRESS POWER AGAIN OR IT WILL NOT PROGRAM
!

If the converter box wont power on and makes a cyclic whinging noise, it may be one of the 4 470uF caps on the low voltage side of the power supply. Check for domed tops on the caps nearest the fly back transformer (center of the board). I replace all four of those caps just to be sure and it is playing fine now.

did you use the same cord as the old one if so try replacing that or try a different plug in the wall

If you need further help, reach me via phone at https://www.6ya.com/expert/david_eb7ea98642566cc6

how can i program a rca remote without a code search button to a apex digital converter cable box

My (otherwise great...) DTX9900 converter box died with these same symptoms. (Units green LED flashes continuously and unit is dead)

Upon inspecting the unit I located a blown electrolytic capacitor on it's power supply board. After replacing the blown capacitor the converter has worked fine. A blown capacitor can be identified visually. The canister's top will be expanded out instead of flat. Just compare all of the caps. Look for any that are not flat on top. Blown caps will usually be discolored. The bad cap in my unit was a 330uf / 16v - 105c value cap. I replaced it with a slightly superior brand 330uf / 25v - 105c cap.

HTH

what can my customer do to get his remote to work? red light on but no green light.