HI,
According to my book, E7-16 doesn't exist, are you sure it is the right code?
Cheers
Andy
SOURCE: Driver for sharp ar 5316 driver for my RHEL 5 machine
You can also go to Xerox.com and select support and downloads.
Type in WCP215 it is the same driver.
SOURCE: Sharp AR-155 digital copier code H 4
An H4 code on a sharp copier inicates a problem with the heat lamp.Often a bad lamp, sometimes a thermal fuse.You should call a copier service technician.There are lethal voltages in this machine.Good Luck!
SOURCE: sharp ar 407
Hello sir;There have a procedure to reset;
1, press "program", "interupt", "clear", "interupt"
2, enter 14, then press start,then enter 0, press start again. then press clear.
SOURCE: ERROR CODE U2-40: SHARP AR 5127
ERROR CODE U2-4 COULD BE RELATED TO THE MEMORY BATTERY BEING DEAD ON TEH MAIN BOSRD IF IT IS AN OLD MACHINE SO YOU COULD CHECK THSI OR REPLACE AND TRY WITH NEW
SOURCE: Sharp Photo Copier AR 5316
Normal
0
false
false
false
MicrosoftInternetExplorer4
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
E7-11 Shading troble(whife
correction)
IMPRPER
CONNECTION OF THE CCD UNIT CABLE DIRT ON THE MIRROR,THE LENS,AND THE REFERANCE WHIT PLATE
copy lamp lighting abnormality
ccd
unit abnormality
MCU
PWB abnormality
(when occurred in the scan position)improper installation of the mirror
unit
Testimonial: "than u sir every time i had problem u are helping me sir thank you so much sir"
59 views
Usually answered in minutes!
×