Question about Golds Gym Trainer 410 Treadmill

1 Answer

Golds Gym Treadmill inclines all the way & will not decline, if you switch the red and black wires it will decline all the way & not incline. I replaced the incline harness & the incline motor & same

Posted by on

  • Kevin Prendergast Jun 02, 2015

    You should be able to get and replace the switch.

  • Kevin Prendergast Jun 02, 2015

    Switches are on the control board. UP is stuck on.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 371 Answers

Bad contact in the switch

Posted on Jun 02, 2015

  • 1 more comment 
  • ashlei johnson
    ashlei johnson Jun 02, 2015

    Is that something that can be fixed? When switching the red and black wires it automatically goes all the way down without pressing anything.

  • ashlei johnson
    ashlei johnson Jun 02, 2015

    Oh okay is that like the switch inside the console or?

  • ashlei johnson
    ashlei johnson Jun 02, 2015

    Is that something that can be fixed or does the board have to be replaced

×

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Proform 590Qs treadmill stuck on incline


You've to check the incline and decline limit switches also the incline motor
If you wish to get some details about treadmill repair and service ; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

Sep 01, 2016 | Proform Exercise & Fitness

1 Answer

My Golds Gym trainer 480 treadmill minimum speed is 3 miles at lowest setting and it will not slow down when pressing the down arrow


Gold's Gym Treadmill Product Support ' ManualsOnline.com

fitness.manualsonline.com/support/golds-gym/treadmill/
My goldsgym treadmill just goes up and down when t. Gold's Gym ... my treadmill walking belt will not turn. ... Golds gym trainer 480 start button stopped working.

Repair Your Own Treadmill With Mark Peterson - YouTube

? 1:16
https://www.youtube.com/watch?v=B997gX07hW4
May 6, 2008 - Uploaded by Mark Peterson
A certified Fitness Specialist by the cooper clinic in Dallas, and a personal trainer for the first 16 years of my fitness career. .... I purchased a used Golds Gym Treadmill model# GGTL396100 which I tested when buying ... The treadmill will fully incline thennot go down, I have tried to recalibrate the incline ..

Nov 26, 2015 | Exercise & Fitness

1 Answer

Treadmill starts moving up and down when key is on. How to fix?


This happened to me as well. As wierd as this sounds, Rub/Massage all of your console keys well because believe it or not, they get stuck. While unplugged and without the magnetic key "inserted". Plug the machine back in and "insert" the key. Allow the machine to do the full incline and decline sequence if it decides to do so. Once this happens the machine should allow you to work the console buttons without any issues. At least this is how I was able to fix mine while on the phone with the Gold's Gym technical support. Hope it helps.

Sep 24, 2015 | Golds Gym Trainer 410 Treadmill

2 Answers

Pftl788071 incline


Sounds like the button on the panel is stuck somehow, I think this because when you switch the wires this would reverse the polarity to the incline motor.

can you tell if the panel is recognizing the pushing of the incline buttons, like with a beep or light or something? If it didn't seem like it's responding this may be because one button is constantly stuck down.

Apr 14, 2014 | Proform Exercise & Fitness

1 Answer

Everything working except the belt


do you have the magnetic tag attached to you and the machine? it prevents operation unless its attached.

Jan 15, 2014 | Golds Gym Trainer 410 Treadmill

1 Answer

I have a Gold's Gym Trainer 480. model ggtl39608. Everything was working fine. Now the incline will not work & the control panel will not light up.


This problem needs more details to service....seem like you have multiple problems...better to call for service 877-805-1030

Jan 01, 2014 | Golds Gym Exercise & Fitness

1 Answer

Golds Gym Trainer 410 belt and incline do not work


LUBE THE DECK BELT SEE THE VIDEO ATTACHED
2) RUN THE SOFTWARE CALIBRATION FOR EASY DIAGNOSE, TROUBLESHOOTING AND FIX IT. GO under the HOOD motor, and follow the steps.
God Bless you
12_13_2012_8_42_51_pm.jpg

Dec 13, 2012 | Golds Gym Trainer 410 Treadmill

1 Answer

My Golds Gym trainer 480 treadmill wont start and none of the buttons work except for the up and down arrows for the incline.


my gold,s gym trainer 480 will ot run,everthing light up on console. could it be a fuse?

Oct 20, 2012 | Exercise & Fitness

2 Answers

Treadmill keeps inclining and declining . It won't stop!


I have a Proform ZT5 model - had the same incline/decline problem. It needed calibrated.
- unplug, turn off, and take the key out
- plug machine in
- turn switch on
- Pres and hold the STOP and SPEED UP button at the same time, while holding them insert the RED KEY
- let go of both buttons
- press STOP 1 time
- pres INCLINE UP 1 time
- this should reset it.

The tech on the phone mentioned the importance of turning the maching off, taking the key out, and unplugging after each use. Leaving it plugged in there is still an electrical current running and this can cause more seriouc problems that require a new control panel.

May 08, 2011 | Proform ZT5 Treadmill

1 Answer

Is there an online repair manual for the Golds Gym Advantage Treadmill? I'm trying to solve an incline problem. The incline does not go up when I push the incline button. I just get a series of beeps...


Your owners manual describes how to perform an incline calibration. Here are the instructions.
Start the machine running. Press and hold the incline up button. While the numbers are changing, remove the safety key. Reinstall the safety key. The treadmill should rise to maximum incline, then lower to minimum. After completing the cycle, the treadmill should function correctly.
If not, you may have a damaged wiring harness (caused during assembly) or a defective incline sensor.
If the sensor is defective, you will need to replace the incline motor.

Mar 01, 2011 | Exercise & Fitness

Not finding what you are looking for?
Golds Gym Trainer 410 Treadmill Logo

Related Topics:

604 people viewed this question

Ask a Question

Usually answered in minutes!

Top Golds Gym Exercise & Fitness Experts

Treadmill Repairs...
Treadmill Repairs...

Level 2 Expert

338 Answers

Pat Ring

Level 1 Expert

39 Answers

jack1983

Level 1 Expert

19 Answers

Are you a Golds Gym Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...