Toned ended brother 1510 - Brother DCP-1510 Laser Multifunction Printer - Monochrome - Plain Paper Print - Desktop Copier/Printer/Scanner - 21 ppm Mono Print - 2400 x 600 dpi Print - 21 cpm Mono Copy - 600 dpi Optical Scan - Manual Duplex Print - 150 sheets Input - USB

please check the model #, there is no dcp-1510

brother dpc 1510 printer showing on print unable 0B. how to clear?

Assuming you have tried to replace an empty toner with a new or refilled toner cartridge. Some of these machine simply fail to recognise the reset activation lever on the side of the cartridge. You could try removing the end cap at the geared end. You will find a half moon shaped gear which needs to be lifted out slightly and rotated a quarter turn clockwise. replace any other gears and refit the cover. This resets the toner cartridge to "new" state. If you printer doesn't recognise this, you will need to get a manual reset keycode from brother. Please note - some folk reset used cartridges this way and re-use them. Used toner will contaminate the drum and give poor print. Any residual contaminated toner on the drum can contaminate a new cartridge and so-on. Refilled cartridges are fine if the cartridge is completely cleaned out first.

Manuals DCP 1510 Australia Brother

User Guide Manuals DCP 1510 Australia Brother

toner chips require replace

brother dcp 1510 problem is after changing toner still toner ended news coming

you can use reset gear with follow structure:
http://reset.vn/reset-hop-muc-may-in-brother-mfc-7470d.html

here is the manual, hope it helps

http://www.retrevo.com/s/brother+t74?rt=tr&p=http%3A%2F%2Fpub.brother.com%2Fpub%2Fcom%2Feur_fax_doc%2Ffaxt74_t76.pdf