Question about ViewSonic N3251w 32 in. LCD HDTV

2 Answers

Viewsonic N3251 doesn't turn on right away

Upon pressing the power button the remote, the red light on the lcd tv turns green, but that's about it. I have to uplug it then press the power button again for it to turn on. What could be causing this? Weak signal?

Posted by on

  • 3 more comments 
  • newmexico Dec 02, 2007

    Exact same problem, press on or remote and most of the time you have to unplug the TV and then try again.

  • Anonymous Dec 02, 2007

    I've had this TV for almost two years and I just now started getting this problem last night. What's the deal here?!

  • Anonymous Dec 14, 2007

    I have the same problem on several N3251W throughout our facility

  • Donald Thompson
    Donald Thompson Jan 29, 2008


    1. The ViewSonic N3251w I have has been giving problems for three months. Turn it on, green light, no picture or sound.

    2. Another time it will work normally for for a time then black screen and no sound.

    3. It may work then black screen with audio.

    4. Turn set on, nothing than after 20 minutes a picture and sound will come for a time.

    5. I have unplug set and still get the same results.

  • Anonymous Dec 18, 2008

    I have gone through 4 different Viewsonic Televisions all with the same problem. This one actually lasted 14 months so now it is out of warranty.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Probably the power planer board. I just had this happen to mine, pulled it apart and had blown caps. Had the caps replaced going to pick up and test today.

Posted on Nov 21, 2008

Ad

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Solution... Call viewsonic and **** till you get a new one (diff model). Good luck, you're going to be on hold forever.

Posted on Feb 10, 2008

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i set up my direct tv remote to my Haier tv


How to scan for TV codes on your DIRECTV remote
  • Make sure your TV is turned on.
  • Slide the mode switch at top of remote to "TV".
  • Press and hold the MUTE button. This is located above the number 1 button.
  • While still holding down MUTE, press and hold the SELECT button until green light at the top of the remote flashes twice.
  • Then enter 9-9-1, the green light on remote should flash twice.
  • Point remote at TV and press CHANNEL UP button. Tap the CHANNEL UP button repeatedly until the TV powers off.
  • When the TV powers off, press and release the SELECT button.

Feb 13, 2013 | Haier HL22XLE2 - HL22XLE2 22 LED-LCD TV -...

1 Answer

I am trying to program my "Direct TV" remote to my Samsung LCD TV Series 5 and can not find the 5 digit code needed to do so.


If you have a DIRECTV white remote, press "menu" then "settings," "setup," "remote", and follow the on-screen instructions.
If using a gray or black remote,
  • Make sure your TV is turned on.
  • Slide the mode switch at top of remote to "TV".
  • Press and hold the MUTE button. This is located above the number 1 button.
  • While still holding down MUTE, press and hold the SELECT button until green light at the top of the remote flashes twice.
  • Then enter 9911, the green light on remote should flash twice.
  • Point remote at TV and press CHANNEL UP button. Tap the CHANNEL UP button repeatedly until the TV powers off.
  • When the TV powers off, press and release the SELECT button.
  • Sep 07, 2011 | Televison & Video

    1 Answer

    Remote codes for the 22LV506 for a dish network remote please. none of the provided codes for this tv work. Thanks, Frank


    You can power scan any dish network remote for the correct code by pressing and holding down the tv button(clear or gray button at the top of the remote) until the lights all light up, release the tv button. Press the larger red power button (not the red tv button) release button then press the channel up button repeatly givng time for tv to shut off. Once tv shuts off press pound key and red tv button to turn tv back on, Press sat key to go back to satellite mode.

    Jun 19, 2010 | Toshiba 22LV506 21.9 in. LCD HDTV/DVD...

    1 Answer

    Polaroid 4011-tlxb. Power to tv and it was turning from red to green light when you press power button but no picture. Pressing any buttons on tv or remote and nothing was happening. Replaced power supply...


    if you replaced the supply board then there is issues with the decoder board as you would need to chec kthat and see if its not the issue.

    Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

    Sep 22, 2009 | Polaroid TLA-04011C 40 in. LCD TV

    1 Answer

    Sky remote code fo LCD LE40A456 TV


    1. Press tv on your Sky remote control.

    2. Press and hold down select and the red button together until the red light at the top of your Sky remote control flashes twice.

    3. Press tv again

    Then enter the remote control code using the number keypad. The red light will flash twice if a valid code has been entered.

    Samsung Code: 0060

    4. Point your Sky remote control at your TV and press the Power button. If this turns the off as you'd expect, then the tv should be set, press Select and the remote should work

    5. If the TV does not turn off press tv, then press the Power button again, repeat this process until the TV turns off, when the TV turns off press Select.

    Jan 26, 2009 | Samsung HP-R5072 50 in. Plasma HDTV

    1 Answer

    Remote code needed (sky+) to sync with Sony bravia kdl32v2000


    1. Press tv on your Sky remote control.

    2. Press and hold down select and the red button together until the red light at the top of your Sky remote control flashes twice.

    3. Press tv again

    Then enter the remote control code using the number keypad. The red light will flash twice if a valid code has been entered.

    Sony Code: 0000

    4. Point your Sky remote control at your TV and press the Power button. If this turns the off as you'd expect, then the tv should be set, press Select and the remote should work

    5. If the TV does not turn off press tv, then press the Power button again, repeat this process until the TV turns off, when the TV turns off press Select.

    Jan 16, 2009 | Sony BRAVIA KDL-32S2000 32 in. LCD HDTV

    1 Answer

    TV not turning on.


    Mine was doing that and I ordered a replacement power supply board for it and now it work. It's fairly easy to replace.

    http://www.partstore.com/GetModel.aspx?MfgName=Royal+Philips+Electronics&BrandName=Philips&ModelNumber=37PF7320A37&page=16

    Mar 14, 2008 | Philips 37PF7320A 37 in. HD-Ready LCD...

    1 Answer

    32PFL5232D/37


    The code is 0081 and this is how you do it.


    '4 digit' or 'Brand Set' method
    1. Turn on your TV.

    2. Press TV on your Sky remote control.

    3. Hold down select and the red button together for about two seconds, until the red light on the Sky remote control blinks twice.

    4. Press TV on your Sky remote control again.

    5. Key in the Brand Set code for your brand of TV. The light on the Sky remote control blinks twice.
    If the light blinks once only, re check the code for your TV and start again at step 1.

    6. Press the on/off button (power-top right button on your Sky remote control).

    If your TV switched off, press select . The light on the Sky remote control blinks twice.

    If your TV did not switch off, press TV , then press the on/off button. Repeat this (press TV , then on/off) until your TV turns off, then press select.

    If the light on your Sky remote control blinks three times, your Sky digibox has checked all the possible settings for the code you used. Check that you have the right 4 digit code and start again at step 1.

    7. Press TV guide .
    If you see the TV Guide screen, the remote control setup process is complete.

    If you did not see the TV Guide, you must now set the TV Guide function as follows:

    8. Press TV on your Sky remote control.

    9. Hold down select and the green button together for about two seconds, until the red light on the Sky remote control blinks twice. The remote control setup process is complete.

    Mar 11, 2008 | Philips 32PF5320 32 in. HD-Ready LCD...

    Not finding what you are looking for?
    ViewSonic N3251w 32 in. LCD HDTV Logo

    Related Topics:

    595 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top ViewSonic Televison & Video Experts

    Cindy Wells

    Level 3 Expert

    6048 Answers

    The Knight
    The Knight

    Level 3 Expert

    76173 Answers

    lubomir73

    Level 1 Expert

    4 Answers

    Are you a ViewSonic Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...