Samsung HL-S5087W DLP TV Logo

Related Topics:

T
Tyrone Washington Posted on Aug 19, 2015
Be the first to answer

The lamp reset instructions do not work whether I use mute or menu. Do all connections(cables) to the tv need to be off?

Answer This Question

2 Related Answers

Anonymous

  • 1 Answer
  • Posted on Jan 03, 2009

SOURCE: buzzing sound with volume off/mute samsung 6163

had this problem. it turned out to be the color wheel. i left it alone but in 1 month's time, the color wheel shattered!. replace the color wheel asap...coz it's a messwhen it breaks

Ad
Mas Baz

Basuki Jrobenk

  • 177 Answers
  • Posted on Apr 17, 2011

SOURCE: Have a Samsung SP50L2HX, replaced

hello,
On condition standby. press Info-menu-mute-power.
Good luck.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

HOW TO RESET LAMP HOUR OF LG PROJECTOR MODEL BX-401C
Try this, it works on older LG TV models:

Put the projector on. While holding down the Menu key on the projector, press and hold down the Menu button on the remote. Keep both buttons pressed for a count of at least 5 seconds.

When the Service Menu pops up, release the Menu button on the remote control first and then the one on the projector after.

Now you're in to the service menu, you need to find out which button on the remote brings up the Lamp Timer Reset function. This is where you're going to have to do a bit of trial and error. With the TVs, the remote button was the Mute key. There isn't a Mute key on the projector remote, so try the Lamp key first. If that doesn't work then try some other buttons. Here's the method.

While holding down the Enter/OK on the projector, press and hold the Lamp key for five second. If this works then the lamp timer reset box should appear. Release the remote button first, followed by the unit button.

Press Enter/OK on the remote to reset the lamp timer. If there's an On Screen Prompt to confirm, press Enter again.

Press Exit on the remote to come out of the menus.

Warning: Don't reset or change any other functions. The service menu isn't the place to be tinkering around with stuff you don't understand.
Read full answer
Aug 31, 2014 • Office Equipment & Supplies
tip

Lamp Reset Procedure for Samsung Televisions.
You have replaced your lamp and the set is working fine but the 'replace lamp light' is still on or the lamp light is blinking. What do you do?

This is an important procedure because you need to know when it is time to replace the lamp again. If you do not reset the timer you may run the risk of having the lamp explode, because it was not replaced in time. This can be dangerous and could cause a fire.

Manufacturers have lamp timers built in to their TVs so that when it gets close to time to replaced the lamp you are made aware of this and if you heed the warning you may save money by not damaging other components such as the ballast. If you do not heed the warning, you are on your own and deserve whatever happens.

To reset first make sure the TV is powered off.

1) Point your remote towards your TV.

2) Press MUTE + 1 + 8 + 2 + Power.

3) Your TV should now say "Loading Factory".

4) Browse down to "Option" then press ENTER (or the right cursor button).

Note: The MUTE + 1 + 8 + 2 buttons need to be pressed down consecutively and fairly quickly. If your TV does not enter the service menu after using this combination, you can substitute MENU instead of MUTE. This seems to work for some sets. Also, the right cursor arrow acts as the ENTER button, so try it if you're having difficulty with the ENTER button.

5) To exit the service menu press the EXIT button or just turn the TV off. Do not turn on the TV immediately after. Let it off for several minutes.

This should reset your counter and you will be ready to enjoy your TV for about another 8000 hours.

Thanks for using FixYa and for the great rating. Please consider a testimonial. Thank you.

hardrocko
Read full tip
on Jan 29, 2011 • Televison & Video
1helpful
4answers

I replaced the lamp on my Samsung HLS5086WX/XAA DLP set. How do I reset the timer on the lamp?
I have a Samsung DLP HLN617WX/XAA. After turning off by itself, the three indicator lights were blinking... signifying a defective lamp. I've re-seated the old lamp several times with no change. I bought a new lamp and reset the lamp hours through the "service menu" with no change. My television is still turning itself off and still blinking the same indicator lights. What should I look at, next?
Read full answer
Oct 26, 2010 • Samsung Televison & Video
0helpful
1answer

How do i replace the bulb in an LG rear projection tv RE44SZ21RD
Note: Wear cotton gloves when handling the lamps as it contains mercury.
  1. Remove the access cover behind the On/Off switch at the bottom of the rear cover by removing the 2 screws using a Philip screwdriver.
  2. Behind the cover is a metal box with a handle that protects the rear of the lamp. Remove the securing screws and pull the box with the handle.
  3. Remove the cable screws and pull out the plug.
  4. Remove the lamp clamp screws and lift the lamp
  5. Put the new lamp in place of the old lamp in reverse sequence of the above.
  6. Dispose the old lamp properly.
  7. Reset the lamp timer.
  • Make sure the TV is on.
  • Press and hold Menu button on the TV set.
  • Press and hold Menu button on the remote control at the same time
  • Hold the buttons until the service Menu pops up.
  • Release the Menu button on the remote then on the TV set.
  • Press and hold Enter /Ok on the TV set then press and hold Mute button on the remote control.
  • Hold the buttons until the Lamp Life Hours screen pops up.
  • Release Mute button on remote then release Enter/Ok on the TV set.
  • Press Select twice to confirm the reset of the counter.
Read full answer
Oct 09, 2009 • LG Televison & Video
1helpful
2answers

Just baught a new lamp and all that is happening is lamp light...
You will need to reset the lamp counter.
Begin with the TV powered off.
Point your remote towards your TV.
Press:
Mute + 1 + 8 + 2 + Power.
Your TV set should now say “Loading Factory”.
Browse down to “Option” then press Enter (or the right cursor button).
NOTE: The Mute+1+8+2 buttons needs to be pressed down consecutively and fairly quickly. If your TV does not enter the service menu after using this combination, you can subsitute MENU instead of MUTE. This seems to work for some sets. Also, the right cursor arrow also acts as the ENTER button, so try it if you’re having difficulty with the ENTER button.
To exit the service menu, hit press the EXIT button or just turn off your TV (remember not to turn on your TV immediately afterwards!).

Read full answer
Jul 09, 2009 • Samsung HL-R4266W 42" HDTV-Ready...
7helpful
1answer

Installed new lamp/how to reset the lamp hour meter on samsung (HL-S4666W)
Here is the procedure for resetting the lamp timer.

This is a quick reference guide to show you how to reset your Samsung DLP TV’s lamp hour meter or hour counter. Resetting the counter is a very simple procedure.
Begin with the TV powered off.
Point your remote towards your TV.
Press:
Mute + 1 + 8 + 2 + Power.

Your TV set should now say “Loading Factory”.

Browse down to “Option” then press Enter (or the right cursor button).

NOTE: The Mute+1+8+2 buttons needs to be pressed down consecutively and fairly quickly. If your TV does not enter the service menu after using this combination, you can substitute MENU instead of MUTE. This seems to work for some sets. Also, the right cursor arrow also acts as the ENTER button, so try it if you’re having difficulty with the ENTER button.
To exit the service menu, hit press the EXIT button or just turn off your TV (remember not to turn on your TV immediately afterwards!).

I hope this information allows you to resolve this issue.
If I have helped you, please help me, and rate this suggestion the highest FixYa rating. (Two Thumbs Up) If you cant rate this post with the highest rating, then please comment to this post and I will try to help you further.
Read full answer
Jun 01, 2009 • Samsung HLP4663W 46" Rear Projection HDTV
29helpful
4answers

E44W46LCD Lamp Timer Reset
To reset the lamp timer, hold the "enter" button on the tv and the "mute" button on the remote at the same time. Once the menu pops up, hit the right arrow on the remote and confirm the reset.


I would guess that's it's a little too late for this answer now, but for future reference... ;-)
Read full answer
Jan 09, 2009 • Zenith E44W46LCD 44" Rear Projection...
9helpful
5answers

Replacing lamp in rear projection tv
To do this, press the ENTER button on the TV and the MUTE button on the remote at the same time. After 5 seconds the screen should come up and it will read "Lamp use time...Total lamp use time ....lamp reset" Press the center button on your remote (the circle button right in the middle of the four directional buttons) and you will be reset to -0- again. Your orange light should now be off.
Read full answer
May 09, 2008 • LG RU-52SZ30 52" Rear Projection...
0helpful
2answers

WD-52725
if you get a blue screen than your lamp is working fine. blue screen is considered "video mute" it display that blue if the tv thinks there is no video. try to reset the tv by pressing - menu 123 then reset to system defaults.
Read full answer
Feb 21, 2008 • Mitsubishi WD-52725 52". Rear Projection...
11helpful
7answers

Lamp Indicator is Orange
Press 'Enter' on the TV then press 'Mute' on the remote while holding 'Enter' down. A menu will pop up on the screen, allowing you to reset the light. It's also worth noting that you can get to the service menu by pressing 'Menu' on the remote and TV at the same time. There is an option for checking the number of hours on the lamp.
Read full answer
Apr 19, 2007 • Zenith E44W46LCD 44" Rear Projection...
Not finding what you are looking for?

View Most Popular

HL-S5087W DLP TV

  • Televison & Video

Related Question

HOW TO RESET LAMP HOUR OF LG PROJECTOR MODEL BX-401C

  • Office Equipment & Supplies

149 views

Ask a Question

Usually answered in minutes!

Popular Questions

Numerous white spots on Smasung DLP TV

Samsung DLP HL-P4663W 46" Rear...

Samsung DLP will not turn on

Samsung HL-R6167W 61" HDTV

Samsung HLP4663W color wheel replacement

Samsung HLP4663W 46" Rear Projection...

Samsung DLP Check Fan #3

Samsung HLN467W 46" Rear Projection...

My Samsung HL-R5667W turns on for a quick flash

Samsung HL-R4667W Rear Projection...

Check Out the Latest HD Televisions Report
Check Out the Latest HD Televisions Report

View all Fixya Reports

Top Samsung Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Grubhead
Grubhead

Level 3 Expert

5755 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...