Question about Maytag MAH2400A Front Load Washer

1 Answer

How can I fix this?

Leaking water from door and flashing LF code

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Maytag Expert
  • 318 Answers

Hello. There is an LE error that means "fill error". There is also a "tE" error that means "sump thermistor failure". You are probably getting the tE error--the thermistor is located at the bottom front of the washer tub in the center. If water is leaking from the bellow(the rubber part that seals tightly against the door), it might be spilling down onto the thermistor wires, shorting it out. With any leak, this will be an INVOLVED repair. My suggestion is to call for service--to reach anything in the front of the washer internally, the front panel must be removed--this is complex, and must be done carefully, especially if the bellow is leaking and needs to be replaced. I hope I helped you!

Posted on Aug 21, 2015

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does the LF code mean?


Long Fill

LF flashes when the water level does not change for a period of time after the valves are turned on OR water has disengaged the basket but control does not detect a water level change.

  • Is water supply connected and turned on?
  • Are hose screens plugged?
  • Is water entering the tub? If so check pressure hose connection to machine/motor control.
  • See TEST #2 in manual

Jun 20, 2014 | Whirlpool WTW5600XW 3.6 cu. ft. Cabrio Top...

1 Answer

Whirlpool LF Error code


LF = Long Fill
LF flashes when the water level does not change for a period of time after the valves are turned on OR water has disengaged the basket but control does not detect a water level change.
Is water supply connected and turned on?
Are hose screens plugged?
Is water entering the tub? If so check pressure hose connection to machine/motor control.

Oct 19, 2012 | Whirlpool WTW6400SW Cabrio Washer

2 Answers

What does LF mean on the washer? When I start my load it pops up as LF and stops washing. What do I need to do or what is wrong?


LF (F30)
LF flashes when the control don't sense any water coming in like it is supposed to do. Things to check:
Hoses connected; water turned wide open.
Hose screens plugged.themobilian_1134.jpg
Is water siphoning out due to having the drain hose too low? (30 inches above the floor)
Pressure hose from tub to control loose, pinched, hole, Sediment in tub? themobilian_1135.jpgthemobilian_1136.jpgBlow that tubing out and re-secure; retry with water OUT of tub so the pressure can properly build in that tubing. themobilian_1137.jpg

Bravos codes and service manual HERE


If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Jan 29, 2011 | Maytag Bravos 3.8 Cu. Ft. Washer

1 Answer

What does the code LF stand for? It keeps stopping half way through the wash cycle and flashes this code.


LF is for long fill.

LF flashes when the water level does not change for a period of time after the valves are turned on OR water has disengaged the basket but control does not detect a water level change.

Check the following:
? Is water supply connected and turned on?
? Are hose screens plugged?
? Is water entering the tub?

If all these are good and water is going in fast (both hot and cold) you may need a service company to come out and take a look

Apr 20, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Code lf keeps popping up


lf code means long fill. If the water fill time exceeds 10 minutes, the water valves are turned off and lf is flashed. Press STOP/CANCEL to clear the display.

Mar 24, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

What does the code Lf mean?


LF Long Fill If the water fill time exceeds ten minutes, the water valves are turned off and LF is flashed.

Press STOP/CANCEL to clear the display.

Feb 18, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Our washers keep flashing LF after the wash cyle and stops workin, not spining very fast either.


Hello there :
the Dreaded LF code means
LF Long fill If the water fill time exceeds ten minutes, the water valves are turned off and "LF" is flashed.

Press STOP/CANCEL to clear the display.
check the water controle inlet valves that are attached to the machine for proper operation and replace if found bad

Jan 07, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

The washer is showing a code of LF what does this mean


LF Long Fill
If the water fill time exceeds ten minutes, the water valves are turned off and LF is flashed.

Oct 25, 2009 | Whirlpool Cabrio WTW6600SBT Top Load...

3 Answers

Whirlpool Cabrio washer is leaking water


The problem happens when your installer throws away the drain hose u-bend, and stuffs the hose as far as it will go down the drain pipe. When this happens the end of the hose can get pushed under water, which causes the washer to siphon out the wash water when it fills. This results in an LF "Long Fill" error.
The solution is to get your installer to come back and install the washer properly.

Jun 23, 2009 | Whirlpool Cabrio WTW6600SBT Top Load...

2 Answers

Oasis elite top load washer


LF code LF Long Fill If the water fill time exceeds ten minutes, the water valves are turned off and LF is flashed.

Press STOP/CANCEL to clear the display
You will need to check you fill hoses this is 95% of the problem in the rear of the unit ther are two hoses Hot and Cold feeds shut off the water and Unplug the unit Then remove the hoses from the machine. in the Valve where the hoses go to there are little mesh screens they are most likely clogged take a eyeglass screwdriver or paper clip and hook the screens pull them out carefully and clean them reinstall and connect hose and test

Dec 19, 2007 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Maytag MAH2400A Front Load Washer Logo

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

jimorris77

Level 3 Expert

411 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Bill Long

Level 3 Expert

606 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...