Optics Logo

Related Topics:

Posted on Sep 28, 2015

Where can I get replacement parts for Polaris 60AZ-D? Need a connector from diagonal mirror to focuser drawtube, 12 mm eye piece,

Accessory tray mounting bolt hole, 3 3 bolts w/ wing nuts & washers 3 1/2 bolts w/ wing nuts

4 Related Answers

Joe L

Joe Lalumia aka TelescopeMan

  • 3186 Answers
  • Posted on Jul 06, 2010

SOURCE: Model 60Az

Only Meade will have these parts. Contact their customer service department here:

http://www.meade.com/support/index.html

Ad
Joe L

Joe Lalumia aka TelescopeMan

  • 3186 Answers
  • Posted on Jul 06, 2010

SOURCE: I need the Eyepiece, Diagonal Mirrot and Focus

Contact Meade's customer service department here:
http://www.meade.com/support/index.html

Joe L

Joe Lalumia aka TelescopeMan

  • 3186 Answers
  • Posted on Sep 06, 2010

SOURCE: i think i am missing parts. what connects the

The diagonal simply slips inside the hole at the rear of the telescope. A small thumb screw secures it. The eyepiece then goes into the diagonal.

Joe L

Joe Lalumia aka TelescopeMan

  • 3186 Answers
  • Posted on Jun 30, 2011

SOURCE: someone just gave me a meade polaris 60AZ-M: 2.4"

Here are all of Meade's manauals-
http://www.meade.com/manuals/

Contact Meade customer service first here:
http://www.meade.com/support/index.html

If they cannot help you then you may find the proper bolt at a well stocked hardware store.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I nwwd a diagonal mirror and a altitute rod for a polaris 60AZ-D telescope

Only Meade will have the "rod".
.
You can buy a diagonal from various on-line retailers. They come in .965, and 1.25 inch sizes; measure the hole in the back of the tube and buy the correct size. Here are two retailers:

http://www.surplusshed.com/

http://www.agenaastro.com/

and here is Meade customer service:
http://www.meade.com/support/index.html
0helpful
1answer

I need to purchase the meade polaris model # 60az-d eye pieces that you use to look through the telescope.

You need to purchase .965 diameter eyepieces. 700mm ( focal length of scope)/ eyepiece focal length=magnification. Maximum power of a 60mm scope is about 225x (under perfect conditions)
I would get a 25mm 700/25=28x for low power see link below
http://cgi.ebay.com/Meade-MA25-25mm-965-telescope-eyepiece-NEW-/230542978572?pt=LH_DefaultDomain_0&hash=item35ad6eae0c
and then for higher power 700/8=87.5x
http://cgi.ebay.com/Astro-Optics-8mm-Deluxe-965-Telescope-Eyepiece-/230543763551?pt=LH_DefaultDomain_0&hash=item35ad7aa85f
There are not many options with .965 eyepieces I would get a .965 to 1.25 adapter or .965 to 1.25 hybrid diagonal. That way you have more options on better eyepieces and the 1.25 eyepieces can be used for better telescopes in the future.
0helpful
1answer

I think i am missing parts. what connects the diagonal mirror to the focuser drawtube?

The diagonal simply slips inside the hole at the rear of the telescope. A small thumb screw secures it. The eyepiece then goes into the diagonal.
0helpful
1answer

Can't figure out how to put the eye-pieces (3) on our Selsi Telescope 335x.

All eyepieces go into the FOCUSER end of the telescope. You never said if this is a REFRACTOR or a REFLECTOR style telescope.

On a refractor you have a lens in the front and the focuser in the back.

On a reflector the focuser is on the SIDE of the telescope near the front end.

The diagonal goes in first --- and the eyepiece goes into the diagonal -- if this is a refractor style telescope. Here is a picture of the DIAGONAL.
http://www.telescope.com/control/accessories/telescope-diagonals/1*25-inch-orion-enhanced-mirror-star-telescope-diagonal
Jul 11, 2010 • Optics
0helpful
1answer

Model 60Az

Only Meade will have these parts. Contact their customer service department here:

http://www.meade.com/support/index.html
3helpful
1answer

I need the Eyepiece, Diagonal Mirrot and Focus Draw Tube for a Polaris Model 60AZ D=60 MM.

Contact Meade's customer service department here:
http://www.meade.com/support/index.html
0helpful
1answer

TeleStar 60AZ-A Telescope: need eyepiece holder...

You mean a DIAGONAL??? Like this:

http://www.agenaastro.com/GSO-1-25-90-deg-Mirror-Telescope-Diagonal-p/odia-gs-gsst.htm
0helpful
1answer

When i look through th eye piece i dont see anything just black i dont know much about it except that i cant see anything out of it

If you have a refractor style telescope like the picture, put the diagonal into the scope, DO NOT USE the 2x barlow if you have one.

Then put the eyepiece with the largest number written on it into the diagonal. Go outside during the day and practice focusing on a distant object.
1helpful
1answer

I have bought a Nexstar 80 from a garage sale. It did not come with an eye piece. I have one now. (Celestron 20mm) I still cannot focus on anything. Is there some other adapter that I need to focus?...

You need a DIAGONAL see this picture, it's basically an "l" shaped accessory that fits into the end of the telescope so you look DOWN into the eyepiece.

http://www.celestron.com/c3/product.php?ProdID=28

http://www.agenaastro.com/Telescope-Diagonal-1-25-inch-s/100.htm
0helpful
1answer

Missing the eye piece for the Meade saturn 60az-m

ebay is a great resource for eyepieces, i would suggest a 26mm ma.
the eyepiece should drop in. if not you might be missing the image erecting diagonal. when the eyepiece is installed you should be looking perpendicular at the tube.
Not finding what you are looking for?

808 views

Ask a Question

Usually answered in minutes!

Top Meade Optics Experts

Cindy Wells

Level 3 Expert

6688 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66837 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39363 Answers

Are you a Meade Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...