How to set time on polar rs300x

To set the Daylight Savings Time on your SKMEI 1163 watch, first press and hold the "MODE" button for approximately three seconds until the "SET" mode appears. Then, press the "MODE" button again until you reach the "DST" mode. Use the "ALARM ON/OFF" button to toggle between "ON" and "OFF" for Daylight Savings Time. Once you have set your desired option, press the "MODE" button again to confirm and exit the setting mode. Your watch should now display the correct time, accounting for Daylight Savings Time.

http://www.polar.com/support_files/us-en/85256F470048B0BC85257574005251DB/Polar_RS300X_user_manual_English.pdf

Page 32

this link is the manual
http://www.polar.com/e_manuals/RS300X/Polar_RS300X_user_manual_English.pdf

It depends on how the break is. Take it to a reputable watch repairer and you will get a good idea - even in India.

this video may help you

I read an answer here:
https://www.amazon.com/ask/questions/Tx1J1II1MX5H9KV?_encoding=UTF8&sort=helpful
= 24mm NATO-Strap + Polar m400 silicone housing

From your comment I have no idea what watch you have! The more infromation you provide, the likelier it is we will have a solution. However, in general, watches cannot tell if you live in a spot on the globe that uses daylight savings time. You have to enter that information. Go into your settings and see if you can turn on Daylight Savings. The watch should set the time automatically at some point, occasionally takes some time. Only a part of the world uses daylight savings, invented by Ben Franklin to save energy(coal oil) just like today!

If you go to my tips and tricks page there is a link to download a pdf version of your Polar Owners manual.

You can also visit directly and search at www.polar.fi or www.polarusa.com but you have to do a little searching, the link will take you there directly.

My suggestion is too contact Polar customer service. There is a link at my tips and tricks page.

To change from 24 hour to 12 hour, you hold down the "Mode" button until it switches from 24 hour to 12 hour or vice versa. To change the time zone, you hold down the "Set" button until the time zone that you set it in flashes (like "LAX" on my watch). Then you press the "Receive/Start/Stop" button to choose the specified time zone you want. To set for daylight savings time ("DST" on the watch), after holding the "Set" button and having the time zone flash, you could press the "Mode" button. It will give you a few options for the daylight savings time (Auto, On, or Off). I chose the "On" option, which immediately changed for daylight savings time. If you manually want to change the time, you could hold down the "Set" button and keep pressing the "Mode" button until the time starts flashing on your watch, then pressing the "Receive/Start/Stop" button until you change it to the time that you want. You could also set the watch to beep or chime after pressing the set button if you wanted to know that piece. You hold down the "Set" button when you are done to get it to stop flashing. These instructions worked for my Timex T5G341 Universal Radio Control Watch. I hope this helps.