Question about Mitsubishi WD-52525 52" Rear Projection HDTV

1 Answer

The lamp light is still on after replacing the

The lamp light (gold not red) is still on after replacing the lamp. We have taken it out and replaced it and also have reset the TV several times, but light continues to stay on.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 64 Answers

Plug the TV out of the wall. Wait. Plug it back in. Does it still stay on? If not, there is somethign wrong with your remote, or the TV circutiry is not shutting off. Try controlling the on/off via manually pushing the power button on the tv (both on and off).

Posted on Aug 01, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just replaced the bulb last week, yet this time the TV will still not turn on and all three lights are still blinking.


It is possible that the replacement lamp is bad but more likely the TV has a protection mode that triggers wen the lamp goes out. Check the manual for ways to reset the lamp usage back to zero or a function that needs to be manually reset when the lamp is changed.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/dave_fb2c45146b845cea

May 02, 2015 | Televison & Video

1 Answer

Replaced lamp on mitsubishi wd62527 worked for 10 minutes then shut down. Now red lamp light is on


If the red indicator light on the front of your HDTV is glowing a solid red, you should first unplug the AC cord from the wall power outlet and wait for 60 seconds before reapplying power to the HDTV.

After you turn the TV on, if it doesn't power up, try holding the power button down for at least 8 seconds. That's supposed to force a system reset. If your model has a system reset button, use that instead. Press the reset button for about 20 seconds...release it and press it again for 20 seconds, release it again and the led will blink just for a minute or two. You should now be able to turn the TV on.
If after several attempts, the HDTV has not fully powered on and the LED on the front of the HDTV is still glowing solid red, you may want to reseat the lamp.

If reseating the lamp has not resolved the issue then your next step is to order a replacement lamp.

Apr 05, 2015 | Mitsubishi Televison & Video

3 Answers

Lamp or power?


Thats a lamp switch error. You need to keep trying to reseat the lamp till it goes away.

May 07, 2010 | Sony KDF-50E2000 50" HDTV

2 Answers

I HAVE A MISUBSHI TV MODEL #WD57734. THE TV WENT OUT AND THE LAMP LIGHT CAME ON. i REPLACED THE LAMP AND KNOW THE LAMP LIGHT AND POWER LIGHT ARE BLINKING AND IT WONT TURN ON.


Try resetting the set, there is a reset on the front of the tv where the power button is located, just stick the point of an ink pen it it and it will reset itself, if this does not work make sure the lamp door is secure.

Dec 04, 2009 | Televison & Video

1 Answer

Tv turns off and on


The first time my lamp needed replaced, the red light came on as well. This time my tv did the same thing, but after talking to my tv repair man he thought it was the lamp. He said that if you use your tv often then the lamp probaly needs to be changed after two or three years. I replacedmy bulb and it corrected the problem and I MUCH BETTER PICTURE.

Dec 29, 2008 | Sony Grand WEGA KDF-60WF655 60" Rear...

1 Answer

Lg tv 52sz8r-tb new lamp installed, red lamp light still on


you need to reset your lamp hours timer. as far as i know this can only be done with the service remote

Dec 12, 2008 | Televison & Video

1 Answer

Lamp out maybe


my tv did the same thing and since I was getting it to work most of the time I didn't do anything until the lamp went out alltogether. If you also get a warning that your lamp needs to be replaced, you better get one. You can get them pretty cheap on EBay and on the web if you google them. Approx. $140 if you search maybe less. From Panasonic it is over $550. It was easy to replace but still cant get the lamp timer meter to reset in mine. Good luck with itl.

Jul 02, 2008 | Panasonic PT-44LCX65 Television

1 Answer

Replacement lamp - Mitsibushi


Did you get the lamp door back on properly? There is a switch that when the door is taken off the switch there keeps the set from coming on.

Jan 05, 2008 | Panasonic PT-56WXF95 56" Rear Projection...

2 Answers

Sony Wega 55" Replaced Bulb TV still does not work


Hello, please check how many times the red light flashes. If it is 3 times this means that the lamp cover is not fastened securely. If the red light flashes 5 times this means that the lamp driver is defect. If you need more help please advice

Apr 20, 2007 | Sony Grand WEGA KDF-55WF655 36" Rear...

Not finding what you are looking for?
Mitsubishi WD-52525 52" Rear Projection HDTV Logo

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76171 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...