Westinghouse TV model TX-47F430S. screen goes out while watching it. I unplug tv and plug back in video comes on for a short time then goes out again. inverter board?I need part # for inverter board

Westinghouse tx-42f430s wont turn on fix repair - YouTube

? 5:29
https://www.youtube.com/watch?v=DdfLu5RdVEQ
May 12, 2014 - Uploaded by After Hours Tv & Pc repair
Westinghouse model # 32H1G1 won't turn on , but If I unplug the TV and wait for a ... -tx-42f430s-42-inch-lcd-tv-appears-bricked-595806.html ... I have a Westinghouse 40" TV that is working, but sometimes it won't turn on.

Westinghouse LED LCD TV Repair - YouTube

? 12:32
https://www.youtube.com/watch?v=DGg5iuFEfdM
Feb 8, 2014 - Uploaded by INSIDEHARDWARE CHRIS
Westinghouse Model: LD-4680 Similar (LD4655VX LD4255VX ...Samsung LCD TV Repair - TV Won't Turn On - How to Replace Power Supply ...

40 inch Westinghouse lcd tv black screen help - YouTube

? 1:39
https://www.youtube.com/watch?v=tKLRihGgZAs
Nov 21, 2011 - Uploaded by Jason Flynn

This fault is not a user repairable one, especially to blu-ray players. Contact the authorized service center for Westinghouse.
Gopakumar Gopalan Google

T'Con board fault. Check and replace it. If you wish to get some details; visit the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/

there could be several things causing this, most often it's a defective inverter, or a bad CCFL lamp. You could also have a problem with 24vdc output from the power supply, or "backlight on circuit from the main board. Get a proper diagnoses.

I would love to assist you in getting your TV back up and running. I need a few more details from you so I can better assist you. Please send me a quick email to [email protected] so I can trouble shoot the problem live with you.

you t.v. has a widley known failure for hdmi failing

This is known as SLEEP MODE problem.

Simple solutions:
1. Get a power surge protector / strip.
2. Plug your TV power cord to the power surge.
3.Then turn-on your TV using the remote control. Just in case it won't go all the way to normal state.
4. Turn-off the switch of your power surge like 5 times with an interval of 3-5 seconds.
5. Then repeat step 3 and 4.
6. These step is done to over-ride the sleep mode.

Roan

This is known as SLEEP MODE / STANDY MODE problem.

Simple solutions:
1. Get a power surge protector / strip.
2. Plug your TV power cord to the power surge.
3.Then turn-on your TV using the remote control. Just in case it won't go all the way to normal state.
4. Turn-off the switch of your power surge like 5 times with an interval of 3-5 seconds.
5. Then repeat step 3 and 4.
6. These steps are done to over-ride the sleep mode.

Roan

make sure tv is on correct source for that hdmi input.

This is known as SLEEP MODE / STANDY MODE problem.

Simple solutions:
1. Get a power surge protector / strip.
2. Plug your TV power cord to the power surge.
3.Then turn-on your TV using the remote control. Just in case it won't go all the way to normal state.
4. Turn-off the switch of your power surge like 5 times with an interval of 3-5 seconds.
5. Then repeat step 3 and 4.
6. These step is done to over-ride the sleep mode.

Roan