- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
04.346, 04-562 Transfer Belt Home
The IBT Home Sensor does not detect the Belt Home signal.
If this fault is declared 3 times in succession, print mode will be disabled. In order to
clear this condition, reset NVM location IOT/Finisher 1221 to 0 in dC131.
That error is an ATC failure. It can be caused by a bad drum or MCU Board. You can first try clear the value of NVM [752-059] (ATC Fail) or NVM [752-060] (ATC Fail Continuous Count) to '0'. Enter Diagnostics, Press and hold the [0] key on the Control Panel for 4 seconds or longer and then press
the [Start] button while keeping your finger on the [0] key.
Password is 6789. And go to NVM Initialize.
Sorry to tell you this, but adjusting or performing maintenance on this machine is very, very dofficult unless you have the technical documentation and in some cases the specialized tools.
If you have a maintenance contract you should call the service department associated with that contract.
Any time the colors are light, be sure to check the amount of toner for that color and make sure there is plenty in the hopper. Also there is often an adjustment that you, ther operator, can make to increase or decrease the color saturation.
. If you are using a manufacturer of the toner other than Xerox, you might get some help with the agent that sold you the toner.
Otherwuse, it takes a trained technician with tools and documentation to keep the Xerox machine running properly.
the motor or gear driving your toner will be kaput. The nvm is just a datbase location that it refers to when it needs to know something. All that will do is run out your black developer (as no toner will be reaching it) Engineer is whats needed
×