I bought 2008 Subaru tribeca and the DVD remote si not working so i bought a new one from Subaru but it's still not working but the unit is ok any idea?

Replace the volume control(rheostat) inside the radio. Only way to fix it. I would personally just live with it until one or the other quits working. Then replace the radio.

all stations, AM and FM?
is the antenna , broken? or unplugged from rear of radio?

past 90.?
that is FM. and FM must have an antenna to work
or are you saying the button fails to advance the stations.
if yes, that is a bad radio.

Radio volume control on 2008 Subaru Tribeca does not ...

www.fixya.com/.../t25735073-radio_volume_control_2008_subaru_trib...

Jun 7, 2015 - Radio volume control on 2008 Subaru Tribeca does not work, but remote volume control on steering wheel works. ... does not... Replace the volume control(rheostat) inside the radio. .... Oct 09, 2014 ' 2007 Subaru B9 Tribeca.

Have you checked; the fuses? The power connection? The ground connection?

if the battery sits in front you will have to remove it.most imports now a days are like this.once the battery is removed you should have ample space to remove the bulb. just make sure that you use a clean rag to install the new one as you must not touch the glss part of the bulb with your fingers or oilly rags.befopre disconnecting the battery make sure you dont need a code to restart the car or use the radio.

I do feel you are being told the truth here sounds like they need to replace the speedo head as its like a mini computer inside its all electronic ,but first i would check the earth wire as this would stop it all from working and the garage if its a dealer would replace unit anyway as more profit involved in unit changing than repairing the earth cable which they would have to do anyway when fitting the new one but a new unit at dealer prices ?? need i say anymore

I think so i just talked to the dealer and they said you need to buy the subaru blades.... it's a total racket. I just bought two new bosch blades from napa and I have now way to put them on the tribeca. so now i have to return them and i'm going to buy a blade refill from subaru b/c the whole blades are 2x as much as the aftermarket replacements. If anybody knows of a way to get aftermarket blades on the tribeca please let me know!

Hello, I know exactly what your talking about! and why no one else did... The error code is being displayed on your trip/odo LCD screen at the bottom of your right gauge pod if I remember correctly. Only, it\'s not Er 66... it\'s (Er bb) which is a malfunction with your vacuum pump system. I truly hope this is the same concern you are asking about, if so I am happy I could help. If it is a different problem please let me know so I can look into this matter further. I\'ve added an "error chart guide" so you will have proof this time when/if you decide to return to the dealer... Good luck!! and I hope this info helps...(subytech1)...

http://www.cars101.com/subaru/keyless.html this site has a lot of info on the car and a coding system which might turn the error off :D

You wouldn't expect these things to happen in a brand new car! But sometimes its good for the manufacturer as they can modify parts and launch field fix programs or recalls. For you particular case I think you should ask the dealer the results of the scannings and post it here so that we can use the information you provide us to better our services and knowledge.
Thank you.