What is the part number to replace the door handle for wmd960g ultima

get a new part and replace it
this is only broken as you do not wait for the door to unlock

Remoove plug from socket, then remove top from machine I think on this model you will need to remove the small caps on side of the top. Then there are 2 screws to remove this will allow the lid to be removed. then you can normally reach inside to release the door.

Hi,

Remove the top cover, and release the door catch from inside the washer, you will probably need a screwdriver or similar to do do this.You will need to replace the door catch and spring, and possibly the door lock, as it may break when you force the door open.

Thank you !!

You can release the catch from inside just keep trying and thern you need to replace the door catch itself this is a simple job

It could be a faulty door interlock, or a broken or weak spring in door handle.
You would need to take the door apart to check this..
What ever is the problem, it is related to the lock or door handle.
Hope this helps.

The door handle can easily be replaced on most microwave ovens. You just have to remove the inner door panel that goes around the perimeter of the glass. The following link explains how to replace the door handle:

http://www.fixya.com/support/r3696942-microwave_oven_door_handle_replacement

The cost usually averages about $20 - $40. Replacements may be purchased at the websites listed in the link I provided. However, price and configuration of your oven also depends upon the MODEL NUMBER. If the model number is correct, the part number(s) for a replacement door handle is WB15X10119 and WB15X10120. The door handle on this model has two pieces.

If you have any questions, please post back with your model number and let me know. I hope this helps you

On MOST microwave ovens, you just have to remove the inner door panel that goes around the perimeter of the glass. The following link explains how to replace the door handle:

http://www.fixya.com/support/r3696942-microwave_oven_door_handle_replacement

If the model number is correct, and you haven't purchased a replacement handle yet, the part numbers are WB15X10119 and WB15X10120. There are two pieces with the door handle on this model oven. Replacements may be purchased at the websites listed in the link I provided.

If you have any questions, or if your model number is different than the one listed, please post back and let me know. I hope this helps you.

Short circuit on the door switch module

Remove all the screws securing the 2 door halves together, and gently prize apart the two halves with a screwdriver or similar, be careful not to drop the door glass.. You will probably be better off removing the door from the front of the m/c altogether.
Replace broken parts as req'd.
Plz rate my solution
Thanks.

Managed to work it out, you have to slide the outer door case away from the handle locking mechanism, slide left and move away (after undoing the 6 screws on the inside) :-)