XCAN'T FIND THE BUTTON TO RUN CHANNEL AUTO SCAN

You need to go into the TV setup menu

Without a remote control, you can't.
http://electronicshelponline.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

Refer its user manual for details.
Electro help

If you don't have a remote, Go to the menu where it says run channel auto scan, hover over the run button and .(on the tv) press volume up, volume down, input and menu at the same time. This (depending on your model) should start the scan

You should have a menu button that will get in into the next menu for initial setup. It will be under something like channel search or channel scan.

Check and replace its main system control memory IC. It is faulty. It does not hold the data. Gopakumar Gopalan Google

Press MENU, use left/right buttons to get to input, then select AUTOSCAN using up/down keys and SELECT/ENTER button. This will take a while, 3-5 minutes. When it finishes, it will default to channel 2. At t.his point, push LIST button to see all stations it found.UP/DOWN buttons will let you select station of interest.

NO picture just error message "please run channel auto scan"

Hello
Here is the procedure for auto tuning. Pleas go through it. Connect the antenna to the rear antena socket marked as &% ohms antena and continue.

If you have already run the Auto Tuner as part of the quick setup earlier in this guide, please

skip ahead to "Channel Summary" to continue setting up your television. In Auto Tuner Setup,

the TV automatically scans through all available channels, memorizing the active ones and

skipping over blank ones or channels with weak signals. This means you scan using the

CHANNEL +/- buttons), you will receive only clear active channels.

Press the MENU button

?† To AUTO TUNER SETUP

?® To operate

?® To choose CABLE or AIR

Press the OK button to start

Initial Setup

Auto Tuner Setup

Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the

message PROGRAMMING OVER! appears onscreen.

Channel Summary

Channel summary allows you to customize the line-up of channels received by your TV. You

can add or delete channels from the line-up or prevent any unauthorized viewers from watching

any or all 181 channels.

Press the MENU button

?† To CHANNEL SUMMARY

?® To operate

The Channel summary screen will now be displayed with

the channels set to scan marked with an "?". You can delete

channels from the scan by removing the "?". If any channels

were missed during auto tuner setup and you wish to add

them, you may by placing an "?" next to the channel number.

?† ?® To the SCAN column

Press the OK button to include or delete from scan

Press the MENU button when finished

You can block access to a channel by activating the channel lock.

Press the MENU button

?† To CHANNEL SUMMARY

?® To operate

?† ?® To the Lock Column ( )

Press the ZERO button to lock or unlock that channel

Press the MENU button when finished

Press the MENU button when finished

AUTO TUNER SETUP
CABLE
If you wants any codes, contact me through Fixya. Ok
.
I'm quating these procedure from the manual I've with me, and it is for JVC AV32S565.