Question about Fisher and Paykel GWL11 Top Load Washer

1 Answer

Why does it leak, even when machine is not running?

Checked all hoses not coming from there.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Fisher and P... Master
  • 9,098 Answers

Small leak/drip with Fisher & Paykel GWL11 Washer (with ...

ths.gardenweb.com > Home Forums > Laundry Room
May 6, 2008 - Got a small drip/leak with my GWL11 washer..... The washer is ...Small leak/drip with Fisher & Paykel GWL11 Washer (with pictures) ..... New project for a new year: Light a fire under plans for an outdoor oven and claim the best pizza in town ... Speed Queen Front Load AFN50 Washer Review - Long Post.

Fisher and Paykel GWL11 Top Loading Washer

ths.gardenweb.com > Home Forums > Laundry Room
Mar 5, 2008 - My GWL11 Top loading washer has had nothing but problems! ... I have a Fisher Paykel GWL11 that I purchased new and have loved until this problem started. ... The machine fills with a small amount of water to saturate the clothes ...... Fault 36 is related to water leaking, but is *not* the kind of leaking from ...

Fisher and Paykel GWL11 Top Load Washer - faqqq

www.faqqq.com/.../fisher-paykel-gwl11-washer-leaking-and-squealing-fish...
Question Product: Fisher and Paykel GWL11 Top Load Washer Question Details:Fisher Paykel ... Small leak/drip with Fisher & Paykel GWL11 Washer (with .

Posted on Dec 12, 2015

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hoover 960 elite series 2 leaking but not from outlet hose


Hi just read your posting.Most of the time when this model of machine leaks it is the drain pump.Have you checked the drain pump?Is the machine noisy on spin?When the machine is running, look underneath the machine to see where the leak is coming from.Please reply with additional information and i am sure i can help you.Looking forward to your reply.

May 18, 2011 | Washing Machines

1 Answer

Water leaking from bottom of machine however I cannot find a leak when inspecting from the bottom with the machine tilted back. Fisher & Paykel model GWL11. I have not been able to determine when (...


Hi just read your posting.Now have you checked for the leak where the drain hose comes out of the case of the machine? It is located at the back top left of the machine.Have you checked the inlet hoses at the tap end and the machine end?Rub the inlet hoses with your hand from the tap to the machine on both hoses to feel if there is any water on them.Check the nozzle under the lid where the water comes into the machine to see if it is not loose or broken.Please reply and let me know how you got on and If you need further help.Looking forward to your reply.

Sep 04, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Water leaking from enderneath, checked all hoses


could be coming from the drain pump seal,,,or main tub seal,,,,outter tub could have a crack in it,,,,i would remove the outter shell and run it to see where it;s coming from!

Apr 26, 2010 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

Water leak


i went to the parts store asked about it and they told me what to do . I didn't even buy a part from them.

Jan 13, 2010 | GE Washing Machines

1 Answer

Dodge dakota vacume problem


You need a diagnostic box to tell you what the problem is.......if it is a evap leak,it could be anywhere,the hoses,the gas tank seal,a cracked hose.If you can go to a dealer they might have a smoke machine, they watch to see where white smoke is escaping from.Which is impossible to tell other wise. Could even have over filled the gas tank,that would give you an engine light......

Jan 17, 2009 | 1998 Dodge Dakota

1 Answer

Washer top


The following link should give you the steps necessary to remove the exterior washer casing to inspect the interior:

https://www.fixya.com/support/r397092-replacing_water_pump

The instructions are for replacing the washer pump, but the steps to gain access to the interior are the same. If the leak is coming from the FRONT of the washer, check the pump and drain hoses for loose connections. If the pump is leaking, it is not repairable (sealed unit) and must be replaced. If the leak is coming from UNDER THE WASH TUB, this is a symptm of a leaking tub seal, or cracked tub. This requires removal of the wash basket to replace either part. If the leak is coming from the SIDE of the wash tub after it starts to fill, check the air dome hose to ensure it is still attached and not leaking. This is a small air hose that connects to the side of the wash tub and runs to your pressure switch. It sometimes becomes loose or disconnected and leaks. If the leak is coming from the BACK of the washer, check the fill hoses and water inlet valve hoses. I hope you find this information helpful. If you need further assistance, please let me know.

Oct 19, 2008 | Kenmore 15864/15862 Top Load Washer

1 Answer

Where is the filter


filter should be checked regularly and is a pain to do on hotpoint. however, blocked filter would not cause leak.
remove small panel at bottom back.
you will see a large diameter hose running from tub to pump.
undo this hose at the tub end and you will find filter inside hose.
carefull, water will come out

Sep 17, 2008 | Washing Machines

1 Answer

Kenmore washer leak


With the machine unplugged and EMPTY disconnect the water and waster water connection from the wall and tip it forward you should then be able to access the pump.  Check the hoses running to the pump. (usually white plastic with 2 large and 1 small hose running to it.. you can also just move it away from the wall with it completely connected and run it thru a cycle to see where it is leaking from.

May 26, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Water output hose


normally, they are just clamped to the outlet of the water pump. but be aware that you still need to raise the part of the hose as they come out of the unit in order for the machine to work. if you leave the hose just lying on the ground,as the machine fills up, water would be leaking down the drain even though water pump is not running. pressure switch will not be triggered and machine will not run.

Feb 18, 2008 | Whirlpool LBR5432PQ Top Load Washer

Not finding what you are looking for?

Open Questions:

See all Fisher and Paykel GWL11 Top Load Washer Questions

Fisher and Paykel GWL11 Top Load Washer Logo

752 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...