At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Testimonial: "Sorry I may not have been very clear, I need the actual button sequence to access settings. I have found out that the admin code is '2800' but not how to get to where it is input. Thanks again."
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Wow. Digital lines are difficult to fax over. Most are still set to use analogue lines.
Those are also very odd changes. Most fax machines no longer even have a setting as low as 9600 baud.
Your fax may not have the ECM mode as changable, may just be built in, but that is not a function you normally would want to turn off. ECM is Error Correction Mode.
This honestly just sounds like a disclaimer to excuse their system's poor fax service.
# Lower the fax transmission speed to 14400 or even 9600 bps, as some older fax machines are not capable of receiving a fax at a high speed. To do so:
1. Press the Fax button, then press Options untill it gets to ADVANCED FAX. 2. Press Select. 3. Press Options untill it getsl MAX SEND SPEED appears on the LCD display. 4. Change it to 9600 BPS using the - (left arrow) button. 5. Press Select.
# Turn off ECM (Error Correction Mode) by pressing the following keys on the operator panel:
1. Press the Fax button, then press Option untill it gets to ADVANCED FAX. 2. Press Select. 3. Press Options until ERROR CORRECTION appears on the LCD display. 4. Change the setting from On to Off using the + (right arrow) button. 5. Press Select. Note: Turning off this option makes it possible to receive a fax when the receiver fax machine does not support certain error correction modes.
set baud rate to 9600 or slow
set resolution to standard
set error correction mode (ECM) off
.
.
if fax has overseas mode turn it on
vonage can make changes to the line that could help, if your using a voice line with call waiting use *70 prior to the number to disable call waiting for that call
×