LG HX906SB 5.1ch 3D Bray and DVD Home Cinema System Logo
A
Anonymous Posted on Jan 28, 2016
Answered

Boot and please wait problem - LG HX906SB 5.1ch 3D Bray and DVD Home Cinema System

Answer This Question

2 Answers

szlag

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 2 Answers
  • Posted on Nov 17, 2018
szlag
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Mayor:

An expert whose answer got voted for 2 times.

Joined: Jun 25, 2010
Answers
2
Questions
0
Helped
16606
Points
22

I had the same issue twice (2 diffrent devices) on LG Blue-ray HX-906 - stuck on "please wait" after switching it on. It turned out to be defective mainboard - main BGA chip (the one with black radiator) has some problem with connection to mainboard. Here is how to repair it:

- dismount the mainboard

- take off the radiator from the main chip

- put alluminium foil around the chip to avoid unnecessary heating up of other parts of PCB

- heat up the chip using air hotgun to about 200 celsius for about 5 minutes.

Mount everything in reverse order and enjoy

  • 3 more comments 
  • Aimar
    Aimar Feb 05, 2021

    Hello. Just tried (5.02.2021) this heating and it really works. Most heating went under black "radiator" and just in case heated little everything. Just tried and no "please wait" anymore. THAKN YOU!

  • Aimar
    Aimar Feb 05, 2021

    My unit is LG HX906PA or HB609PA

  • Paulo Pereira
    Paulo Pereira Jun 15, 2022

    Comigo tamb?m resultou. Obrigado pela partilha amigo.

  • Dante Passos Cioffi
    Dante Passos Cioffi Sep 09, 2022

    Problema resolvido com a solu??o apresentada de reflow no chip BGA - Muito grato!

  • Mario
    Mario May 06, 2023

    Fiz exatamente este procedimento e deu cert?ssimo! Observa??o: para retirar o dissipador tem que soltar a placa toda e descomprimir as garras de pl?stico dos fixadores do dissipador que ficam no lado oposto. Usei fita amarela de alta temperatura para proteger os componentes ao redor. Soprador no fluxo m?ximo e em 200°C por 5 minutos com a boca de 1cm e dist?ncia de 5 a 10 mm, passeando pela superf?cie do CI.

×

Claude Kayser

Claude Kayser

Level 3:

An expert who has achieved level 3 by getting 1000 points
Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.

  • LG Master 9,098 Answers
  • Posted on Jan 28, 2016
Claude Kayser
LG Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.

Joined: Jun 15, 2015
Answers
9098
Questions
0
Helped
5064299
Points
28436

LG HX906SB 5.1ch 3D Bray and DVD Home Repair ... - Fixya

www.fixya.com/.../p3079971-lg_hx906sb_5_1ch_3d_bray_dvd_home_...
Recent LG HX906SB 5.1ch 3D Bray and DVD Home Cinema System questions,problems ... Lg bluray boot ... My bluray home theatre stuck on please wait · LG ...

How do i reset my lg hx906pa cinema system - Fixya

www.fixya.com/support/t16589274-reset_lg_hx906pa_cinema_system
Feb 15, 2013 - Question about LG HX906SB 5.1ch 3D Bray and DVD Home ... I have read all the instructions but I have not found a solution to my problem. ... Lg hb44 home cinema comes on but will keep saying please wait ... Lg bluray boot.

Make LG BLU RAY 3D multi regional - Fixya

www.fixya.com/support/t14433338-make_lg_blu_ray_3d_multi_regional
Sep 23, 2012 - Question about LG HX906SB 5.1ch 3D Bray and DVD Home .... 3d blu ray home theather model# lhb336 problem/boot and please wait.

google.com

related Google Search

google.com

fixya.com

LG HX906SB 5 1ch 3D Bray and DVD Home Cinema System...

fixya.com

Recent LG HX906SB 5 1ch 3D Bray and...

error.orange.es

error.orange.es

Orange La pgina que buscas no ha...

fixya.com

How do reset my lg hx906pa cinema system LG HX906SB 5...

fixya.com

how do reset my lg hx906pa cinema...

error.orange.es

error.orange.es

Orange La pgina que buscas no ha...

fixya.com

Make LG BLU RAY 3D multi regional LG HX906SB 5 1ch 3D...

fixya.com

make LG BLU RAY 3D multi regional LG...

error.orange.es

error.orange.es

Orange La pgina que buscas no ha...

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0answers

My gateway laptop is stuck on blue screen w/please wait displayed. Tried 2 get gateway help but no warranty so switched 2 someone that told me 2 pay $100 to continue support! Please help!
Read full answer
Be the first to answer Jul 25, 2015 • Gateway Computers & Internet
0answers

Please wait warming up
Read full answer
Be the first to answer Mar 12, 2015 • Xerox Phaser 8560DN Printer
0helpful
1answer

I have power but my player screen reads "Please Wait" tried turning off for 5 min. then "Boot" comes on. When you hit power then the "please Wait" comes back on.
SOUNDS LIKE FAULTY DVD DRIVE

WWW.GENUINEREMOTES.CO.UK
Read full answer
Apr 07, 2014 • LG ELECTRONICS Remote Control LHB336...
0helpful
1answer

Won't boot no beep no cmos bottom of screen displays [please wait]
Motherboard problem
Read full answer
Jan 28, 2014 • Acer Aspire One PC Notebook
0helpful
1answer

We found an inconsistency in your data and are fixing it. Please wait while we restart your computer
To enter safe mode, At boot start tapping F-8. Or, Unplug, while running, remove battery, plug in, reboot, a list should come up select safe mode with networking. OR, while running open MSCONFIG, by opening RUN and typing MSCONFIG and OK, select Boot Tab, Safe boot, restart. Try Running Command Prompt, as Administrator, type sfc /scannow.
Read full answer
Feb 02, 2013 • HP Mini 1000 Netbook
0helpful
1answer

Lg network 3d blu ray home theather model# lhb336 problem/boot and please wait
Check working condition hardware. May be malfunction Main Boar or AMP. Unplug cable (wires) attached from Power PCB Board and main board to AMP PCB Board. Turn ON, if again comes message " Please wait" and unit sot down itself- Malfunction main board. If unit booted UP -OK -replace AMP board. Parts are available on our web
Read full answer
Dec 12, 2012 • LG LHB336 3D Wi-Fi Ready Bray Home Theater...
0helpful
1answer

Won't boot up beyond the system password screen. I never set a password. This is an improvement from the black screen of death with only a cursor that I had earlier. PR: wait... I:...
use another pc go to a linex site download ubuntu live cd and you can boot your pc,linux MINT is very good also.there free.learn the commands and how to use the terminal and you can do anything.It will boot up your pc and you can go on net also.
Read full answer
Sep 06, 2009 • HP Pavilion dv2500t Notebook
0helpful
1answer

The please wait then welcome and stays at welcome.
1. Try to boot your computer in Safe mode and run a full system virus scan with your anti-virus software, this may fix the problem. The system will boot in safe mode only if its not a major damage to the file. If the system is not booting in safe mode, then perform system restore. Click start>all programs>Accessories>System tools>System Restore. Restore computer to a date where it was working fine.
2. In case the system refuses to boot up at all, then it is recommended to run a repair setup of windows Xp. To run repair setup, boot the computer with Windows Xp bootable CD and on installation screen, press R for repair setup. For detailed steps see http://www.windowsreinstall.com/winxppro/installxpcdrepair/indexfullpage.htm
Read full answer
Mar 22, 2009 • Dell InspironTM 1501 Notebook
0helpful
1answer

Boot error...please wait
1 Hold down the power button for 15 seconds.
2 plug into usb on pc.
3 Update the firmware
http://www.rcaaudiovideo.com/categories.aspx?product=317&post=4
Good luck. Worked great on mine.
Read full answer
Dec 30, 2008 • RCA M4204 MP3 Player
0helpful
3answers

Mother board driver issues
Don't panic. If you take the cover off the side of the computer and look at the motherboard you will find a jumper that says cmos. You can switch the jumper and wait a minute or so then switch it back and it will boot up its defaults. If you cant find the jumper just take the battery out of the motherboard and wait a couple minutes and then put it back in. that will do the same thing and it should boot up fine.
Read full answer
Mar 02, 2008 • Intel Motherboard
Not finding what you are looking for?

View Most Popular

HX906SB 5.1ch 3D Bray and DVD Home Cinema System

  • Audio Players & Recorders

Related Question

My gateway laptop is stuck on blue screen w/please wait displayed. Tried 2 get gateway help but no warranty so switched 2 someone that told me 2 pay $100 to continue support! Please help!

  • Gateway Computers & Internet

Related Topics

15,955 views

Ask a Question

Usually answered in minutes!

Popular Questions

"S-Protection"

LG BH9230BW 1460W 9.1-Channel 3D...

My LG Home Theater is Stuck on Please Wait. How do i fix it

LG Audio Players & Recorders

HOW CAN I MAKE A HARD RESET FOR AN LG SOUND BAR WITH CODE NB2420A

LG NB2420A 160W Sound Bar

How to pair my soundbar and wireless lg soundbar

LG Lsb316 Sound Bar With Wireless...

LG FM37 SOFTWARE, LG MEDIA CENTER

Audio Players & Recorders

Latest Celebrity Headphones Report
Latest Celebrity Headphones Report

View all Fixya Reports

Top LG Audio Players & Recorders Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Paul Bade

Level 3 Expert

1818 Answers

Are you a LG Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...