Question about Computers & Internet
Use reset button.
I do not know what is your router type. Therefore I put here more options. Select what is valid for you:
ZyXEL PK5001Z Factory Reset
How to Reset the Asus WL 500g
Posted on Feb 13, 2016
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: cannot reset to factory default
Try hard reset Hold the reset button for a minute and while you are holding the button, also unplug the power cable from the back every 15 seconds. So, you would unplug the power 3 times and make sure, dont release the reset button even when the power is unplugged. This works for most of the SOHO routers. cheers
Posted on Mar 14, 2007
connect your router to computer with ethernet cable.
Then you can access it with following link.
for belkin routers http://192.168.15.1
for other routers
If you have problem in access router then you need to reset all settings to defaults then you can access it with above method.
For that press RESET button for 10 seconds it is in back panel of router.
Type user as "admin" and password as "admin" or blank or "password"
Then you can see configuration page of router.
Posted on Nov 22, 2009
SOURCE: Wireless light is not on
To restore the factory default configuration settings without knowing the administration password or IP address, you must use the Default Reset button on the rear panel of the router. 1. Press and hold the Default Reset button until the power light blinks on (about 10 seconds). 2. Release the Default Reset button and wait for the router to reboot. If the wireless router fails to restart or the power light continues to blink or turns solid amber, the unit may be defective. If the error persists, you might have a hardware problem and should contact technical support.
Posted on Nov 28, 2009
Tips for a great answer:
Mar 02, 2011 | Computers & Internet
Feb 19, 2011 | NetGear WGT624 Wireless Router
Unfortunately, there is no way to recover a lost or forgotten password from a router or access point; you will need to reset the device to factory defaults. However, once the device is reset to factory defaults, you can use the default username ("admin") and password (either "password" or "1234" depending on your router) to reconfigure your router settings.
if there is a small hole in the front or back of the router push a hair pin in to reset to factory settings
hope this helps
Jan 17, 2011 | NetGear WGT624 Wireless Router
Aug 13, 2010 | Cell Phones
Mar 03, 2010 | Xerox Phaser 4500 Printer
Feb 16, 2006 | D-Link AirPlus Xtreme Super-G DI-624...
Feb 16, 2006 | D-Link Express EtherNetwork DI-604 Router
Nov 06, 2019 | Power Computers & Internet
Nov 06, 2019 | Facebook Computers & Internet
800 people viewed this question
Usually answered in minutes!