I am trying to set up my LG Magic Remote to work with a Openbox V8S, but openbox is not listed? Does anyone know how to do it?

Check the remote control for its infrared emission. Check it with fresh batteries. Check it by pressing all the keys. You can detect the presence of infra-red emission from the remote control, using a cell-phone camera. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. Surf the site with patience. In some cases, the remote control might need to clean.
http://remotesearch.blogspot.com/
Search the site by type in this key phrase "how to test a remote control "in the "search box at the top right of the display window of the Homepage" to get the related post quickly.
https://www.youtube.com/watch?v=jsSCNCW3IbQ [open and clean]
https://www.youtube.com/watch?v=Qp-l1uh-5gE [open and clean]

Hi Alan,
It seems to me that the best way to solve this problem would be to uninstall/ remove the programmes. Just be careful and check that you don't compromise any data!

To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability.
Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops.
Type in the "brand name only" of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

HOW TO DO CHANNEL UPDATE FOR OPENBOX SKYBOX F3 F5 F5S LATEST LIST ATTACHED
Try this video. http://electronicshelponline.blogspot.com/

http://www.simplefta.com/attachment.php?attachmentid=9826&d=1381762350
Well you've to signUp at this forum in order to Download a firmware for your openbox
Registration is Simple , So after Registering
Download the file from above link and
Updated Openbox All-in-One Clone Safe For_ s9_s10_s11_s12
Openbox update (updated a lot of channels Updated Openbox s9..s10..s11.. s12.. all-in-one file 10-14-13

• Guide As Stated In FORUM

This is complete .abs file with channel list i made with newer firmware...... Satellite is set using a diseqc switch with 119 Satellite set to port 1 and 110 Satellite on port 2 ( you may have to adjust your Satellite settings to match your system )and using the free trial japan server (japan server is down now so you must put your own p$ info in to get a picture)........Follow these steps.....Download this file to desktop and then unzip it and send the (.abs file)to your usb pen drive---then take from computer and insert in yourOpenbox---now go to menu----tools---upgrade by usb---top line is upgrade mode ( set this to ''image file(.abs)" )---now one click down to upgrade file and right click to find this file ( .abs )---then one click down to "start" (ok) and let it download and when it asks "are you sure to burn" click "yes" and let it finish and reboot...........If you get scrolling picture when you downloaded just hit the v-format button on your remote until the picture straightens out and go to ....Menu---system setup---down to ''video out'' and set that on ''rgb''........Exit out to picture......This file is the latest upgrade with channel list included and will work fine on S9..S10..S11..S12 Openbox receivers......If you have trouble updating with USB just use the serial loader and a null modem cable.........................bigslim

They will, just make sure you save setting when you leave the menue.

0092,0091,0099,0000. Check these codes. If you wish to get more details, check the sites linked here. Setup code list, and setup procedure to many popular brand remote controls are given. http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/ Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy.

May be you should try to restart your phone and reinstalling the firmware may also solve this if these options not work then you have to change your phones display screen

I think you mean a usb port. See here.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!