Can't get menu and info on Sony tv with either Sony remote or mediacom remote

All about Universal Remotes and why in 2024 no one uses them!.

https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote

SONY 3 & 4 digit universal codes are 002, 000, 011, 080, 111, 006, 071, 128, 1904, 925, 0000, 0834, 0810, 1685, 1786, 1032, 1972

..

Thanks! Code 1516 worked to program my sony bdp :)

Hello
Four digit universal remote codes for Sony TV with Humax Foxsat remote are:

0037, 1505, 0036, 1925, 1825, 1751, 1685,

1651,1625, 1551, 1317, 1010, 0834, 0810,
0353, 0074,0011
Three digit codes are:

006, 301, 005, 446, 412, 393, 375,

360, 325, 255, 203, 185, 174, 058,
003
OK.

my home theater model dav dz270 but my remoteis missing please help me what is the remote number

I can help you with your URC-3021 Universal Remote Control issues.

The codes for Sony TV's are: 0000, 1100, & 0810.

For complete instructions on entering the URC-3021 remote codes, please refer to my posted Fixya Tip One For All URC-3021 Code Entry.

I hope that helps.
_______________________________________________
Reassign URC-3021 Device Key
Urc-3021 Code List Download
One For All URC-3021 Code Search

The Sony RM-YD029 Remote control will work with the Dish Network VIP722 DVR HD Satellite Receiver, but the Dish Network VIP722's Primary remote address must be set to 1.

The procedure below will allow Sony RM-YD029 remote control to operate Dish VIP722.

Using the Dish Network Remote Control -
1. Press menu 2 times to get to system info page
2. In the system info page the primary remote address is in a white box (bubble) followed by a Green TV (1)symbol that says IR and indicates you the channel your remote control one is configured. The Sony RM-YD029 will work when this primary remote address number (in the white box) is set to 1.

If the Primary Remote Address of your VIP722 Remote control 1 is not set to channel 1, here is how to change it:

1. While displaying the system info page, press and hold the SAT button on your dish network remote until all other modes are flashing, about 3 seconds.
2. then press the '1' button on the numeric pad of your dish remote
3. then press the '#' button on the numeric pad of the dish remote
4. then press the 'record' button (red dot button - stores setting)
5. At this point you should see a number 1 in front of the primary remote address on the dish system info page

Ensure you enter the corresponding IR code into your Sony remote control per the instructions in the manual or Sony's web site. My 722 works with Sony IR code - 01775.

hi i used to be an installer for mediacom the remotes will not program to your tv if it is a tv dvd combo

You did not specify if is tv, dvd, vcr
try:
SONY DVD PAYER: 0533, 1533, 0864, 1033.
SONY DVD PLAYER/VCR COMBO: 0864.
SONY TV:0000, 1100, 0810
SONY TV/VCR COMBOS: 0000, 1232
MAGNASONIC TV/VCR COMBO: 1278
MAGNASONIC VCR:1278
SONY VCR: 0035, 0032, 0033, 0000, 1232, 0636

I'm not sure of your model number but those remotes use the NEC codes and the variants on the NEC codes. If that code set is not the databse, you may have to "learn" it on your particular remote.

Good luck