When not using the headphones for 6 months should they be left charging in the charging station or out.

If the bluetooth you are referring to is a bluetooth earbud, the batteries may be dead. You may need to buy a new earbud.

Wait to see if it gets a charge on the port. If the headphones don't work, call customer service for troubleshooting relief.

If the red light is on for such a short period of time, it probably means that the headphones are charged. The red light will flash for a long time and then turn green only when you charge on the dock headphones that need charging. I suggest to try to use them without charging them and see if the headphones work.

It depends entirely on what you are using it for. If you are talking how long will it hold a charge on the shelf with nothing hooked to it, weeks if not months, but I would charge it once a month to be sure.

Try to press the power botton in the same time you plug the charger, after this action mine is working and charging perfectly, maybe this is the "reset" solution... Hope this helps you.

You can actually use two regular dry AAA batteries to power these headphones, the only thing is that you will not be able to charge those batteries with the charging station that comes with the headphones.

The remote comes with a charging dock, if you did not get this you can order one from RTI (952) 253-3136.

BATTERY AND DOCKING STATION
The T2+ uses a Lithium-Ion rechargeable battery. This battery does not exhibit any type of "Memory Effect" from being charged too often. Since the T2+ can safely be charged after each use, a docking station is included for convenience. If left out of the docking station, the T2+ will remain in sleep mode for 1 or 2 months before shutting down. At that point the battery must be recharged. The T2+ Docking Station can be placed on a flat surface such as a shelf or table, or it can be mounted to a wall using the mounting holes on the back of the unit. If the T2+ battery capacity is reduced to approximately one hour of remaining run-time, a low battery icon will appear in the upper left corner of the display The docking station LED illuminates to indicate a charge in progress. The LED will turn off when the battery in the unit is fully charged.A fully discharged battery will take approximately 2-4 hours to completely re-charge.The T2+ can remain in the docking station indefinitely without damage to the battery.

my apple ipod is not charging what should i do plz help me [nano 3rd genaration]

The green light only comes on when it is receiving an audio signal.

Standard batteries will work.. if you NEVER use the charging station.. and plan on replacing them every x number of hours used.. IMPORTANT.. if you forget.. and place the headset on the charging station with standard batteries.. they will probably rupture.. and may well ruin the headset..

If you decide to replace the chargable batteries.. make sure you replace them with the right size and type..

k i have the same model>try this when hook the i-pod on the docking make sure its off and charge ir fully for one hour and check