Pasnew plg-1002ad i want to set it to ring on every hour pass not the alarm but like other watches have make a bip bip on every hour but cant find away to do it even on instruction me

I searched using http://www.google.com and could not locate a manual.

I found contact information for the manufacturer in
China:

Address: No. 17 Hebu, Jiangshi Road, Jianggao Town, Baiyun District, Guangzhou
TEL:+86-020-86210133
FAX:+86-020-86210883
E-mail: [email protected]
ZID:510450

Sales Department

Address: D052-D053 first floor, New South Watch City, No. 59 Zhanxi Road, Yuexiu District, Guangzhou
TEL:+86-020-61188393
FAX:+86-020-61188165
HOT-LINE:400-8606000

Attention: I cant help with any problems with this watch as I have lost the watch a little while back. Sorry for the inconvenience and I would continue further research if I had it still. Sorry for the inconvenience.
https://inro.in/tunnelbear , https://inro.in/purevpn/ , https://inro.in/sling-tv/

You have to set the hour. After you cycle through all 24 hours, you can cycle through am/pm hours.

Dealextreme - PASNEW Sport Waterproof Quartz Analog ...

? 6:32
https://www.youtube.com/watch?v=7D6i4d-1NYQ
Oct 25, 2011 - Uploaded by TheTemplegeek
... PU watchband - Dual time display: analog and digital - Features timer, ... PASNEW Sport Waterproof Quartz ...

How to set watch model WR30M - YouTube

? 3:02
https://www.youtube.com/watch?v=VGRAb0aF2lQ
Apr 29, 2015 - Uploaded by TheUltimate
11:24. How to Set a Timex Ironman Triathlon Watch - Duration: 1:15. by Inside Endurance Sports 2,441 views ...

how to set time in digital watch - YouTube

Ignore the instructions I found its not as easy as they say first you need to sync the digital and analog to do this press all four buttons at once and hold for 3 secs tho sets the digital clock to 12 Now press mode till you see h-s hold reset till h-s flashes hold the start button in the analog will start moving its slow so be patient set analogue to 12 exactly ignore the minutes that have passed press preset the minute hand will automatically adjust once done press mode go to the main watch screen hold preset use mode to select hours minutes date year month etc and start to change the values keep it on 12 not 24 hour clock set the clock and press preset the analog will now automatically adjust to the time once done you can change to 24 hr mode if you wish

Pull out the crown to the alarm setting position. The crown is located on the right side of the face of the watch. Pull the crown out until "AL", the alarm indicator, is shown on the watch. Depending upon the model of your Tag Heuer Aquaracer watch, you will either pull the crown out in the first or second position.

Select the hours and minuets for the alarm. Once your watch is in the alarm setting position, press the bottom right button on your watch. This will enable you to select the hours and minuets that you want to set the alarm for.

Set your alarm. To begin setting your alarm turn the crown clockwise until the desired hour or minutes are displayed on your Tag Heuer Aquaracer watch. If you happen to accidentally pass the alarm time, turn the crown counter-clockwise the get back to the desired alarm time.

Save your alarm. When you are ready to save your alarm, simply push in the crown. Once your alarm sounds, to silence it press any button on your Tag Heuer Aquaracer watch.

Go here, click the image to expand, and look on the far right...
http://www.pasnew.com/upload/6341400418151562501892444581.jpg

First off, press the "mode" button for 3 seconds. Secondly, after the watch enters the "Time Editting Mode", press the "mode" button for 1 second (Clearly to say, it's recommended that you should release immediately right after you press it). Lastly, press the "start" button to navigate through hour, minute and second numbers. In order to change those values, you need to press "alarm" button several times. Hence, the values to be set increase.