Hi! My SHARP AR 5320 can't operate I turned on the switch then the 3 codes --- is flashed and after that, L and 4 is blinking what shall I do? Thank you.
I used these method and it works that it clears the error but when I turn it back on it appears again the L and 4.
1, press"#" "interupt" "c" "interupt" these 4 keys.
2, enter 14 , then press start
3, turn power off and back on .
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The H4 stands for a problem in the heater circuit for the fusing unit, It could be a thermo fuse, thermostat, thermistor, bad heat lamp or worn fuser rollers. The H4 will not reset until either of these components is repaired or replaced. Hope this helps.
Push the 'clear'
button and then the 'auto' button then the 'clear' button and then the 'auto'
button again.This should be done as quickly as you can and the console will go
blank.Next,select 14,which is the low temp clearing code, and then push 'start'
and then turn the machine off and back on again.
On your keypad press in order # * C * .That will put the machine in diagnostics. Then enter 14 like you were making 14 copies. then press 1, then start, that will reset the machine.
please try to reset .here the programme you have to do ..# interrupt c interrupt. mechine will go shutdownmode then press 14 and press start. u will solve the problem
Appreciate the direct "Ask Me". For Sharp AR5316/AR5320 drivers, pls click here. The drivers are for Windows 95, Windows 98, Windows ME, Windows NT, Windows 2000, Windows XP only.
Just a start, do postback how things turned up or should you need additional information. Good luck and Thank you for using FixYa.
Hi, H4 is a heater error. Try resetting it by the following; Enter #, interupt, Clear, interupt, display goes dead, enter 14 then print. That will clear the error code, however if you have a problem with the heater it will return. It is probably the thermal fuse has tripped, which is resetable by removing the fuser unit
×