Lg tromm front loading washing machine has

SOMWE TIMES THE TUBE LINES CAN GET BLOCKED OR CLOGGED OR EVEN HAVE LEAKS, YOU WILL HAVE TO TAKE OUT THE DISPENSER AND CHECK CONNECTING TUBES. ALSO TRY POURING VINEGAR INTO TUBE AND LET SIT FOR AN HOUR OR SO

The water usually drains from the drawers just by gravity. Have you checked that your machine is level?

Water remaining in soap dispenser. In front loading washers made by LG (some Kenmore too), water may remain filled in the soap dispenser after the wash cycle. This may be caused by the siphon tube being contaminated by detergent residue. To clear it, remove the siphon cover from the tube, and clean them thoroughly, making sure that all residue is removed. Replace the cover and make sure it seats properly all the way down. This will ensure that the siphon starts and continues until the dispenser tray is emptied. A small amount of water, a half inch or less, remaining is normal. There is a video on YouTube that suggests buying a new detergent tray. Try cleaning it first. There are no parts that will break or wear out under normal use.

try turning water pressure down a little, also pull drawer out 10 millimeters or 1 centimeter that might help. please reply if u need more help

faulty water valve turn both off to see if it stops then turn on one at a time if it leaks thats it

For the owners manual go to
http://www.lge.com/us/appliances/washers/index.jsp
and search for your owners manual by part #

If it's not leaking outside I wouldn't worry

water leaking from soap dispenser. so water pours out under the soap dispenser

Is the water valve screens plugged restricting the amount of water going into the washer other wise your pressure switch is reading the wrong water level.