TV LOCKED My colleague's daughter somehow managed to lock the tv, and there is nothing in the manual telling her how to unlock it. What is locked? (child lock???) How do we unlock it? Telefunken TTV-5450 tv

try to press the display button on your remote for 5 sec, when the lock symbols disappear turn off your unit on the remote and unplug it

For Haier TV HL19T, the override password would be 0000 or 9443.

What brand is the TV. I would call the manufacturer tech support. If you have the manual the number could be in one of the back pages. If you don't have the manual search the manufacturer online. They usually have a support link with a phone number.

Try this: press "Function" and "Mute" on the remote at the same time. This will unlock the channel. Do this if you want to bypass the lock to watch a certain show or channel while leaving the TV locked. All other channels will remain locked and the TV will lock again when it is turned off.
Unlock all of the channels on the TV by entering 0711 or 3308. These are the Jensen factory reset codes that will reset the TV to the original factory settings. By doing this, you will loose any information that you have stored in the TV, such as channel labels and schedules. You will have to program the TV again by going through the entire initial set up.

download all your files to the computer and format the card through the camera menus (not the computer)

Try to unplug it for a day and maybe it would lose its memory

What is the Brand of your tv? other tv has CHILD LOCK need the original remote control to reset it.

I found this online somewhere and it cleared my problem.

(my problem was a blue screen that said my input was locked enter in your code using the 10 key pad. Both inputs were locked, I used the steps below and it cleared it. We are now watching a dvd for the first time in months!) Thank you Bob Waterman whoever you are!)


MITSUBISHI CS3114R

Parental Lock



This system can lock each channel or different channels on ANT A and ANT B
as well as locking each of the EXT inputs, so you should confirm what is
locked before trying to unlock.

1 On the remote, set the TV/VCR switch to the TV position
Or . Depending on which remote is being used
Press the TV mode button at the top.

2. Turn on the TV and using the SCAN buttons (or 10 KEY FAD) and the INPUT
buttons check each channel and input to establish which channels and inputs
are locked. The screen will tell you if the channel or input is locked.

3. Press the button labeled MENU. The screen will show the main TV menu.

4. Press the #5 button (channel lock option).
The screen will change to show the channel lock System Menu. This screen
will indicate that the lock system is either ON or OFF.

IF THE SCREEN INDICATES LOCK IS ON, GO TO STEP 5
OR:
IF THE SCREEN INDICATES THE LOCK IS OFF, GO TO STEP 5A

5. Press the #3 button. (SELECT CHANNELS TO LOCK option). The screen will
ask for the code number. Press the #9 and QV buttons at the same time.

Notes: The screen will change to show an information display that will show
the selected antenna and channel or input. The display is superimposed over
the picture. This display will indicate that the channel or input is either
locked or unlocked. In the lower middle will be instructions to use the
10-key pad or SCAN buttons to select the desired channels (or the INPUT
button to change antennas or select the EXT inputs). At the bottom of the
screen will be instructions on how to change the current LOCK status (if
unlocked use the ENTER button to lock, or if locked use the CANCEL button to
unlock).

NOW GO TO STEP #6.

5a. Press the #1 button (channel lock ON option). The screen will ask for a
code number. Use the 10-KEY PAD to enter a new code number (We suggest 1111)
and then press the ENTER button.

Notes: The screen will change to show an information display that will show
the selected antenna and channel or input. The display is superimposed over
the picture. This display will indicate that the channel or input is either
locked or unlocked. In the lower middle will be instructions to use the
10-key pad or SCAN buttons to select the desired channels (or the INPUT
button to change antennas or select the EXT inputs). At the bottom of the
screen will be instructions on how to change the current LOCK status (if
unlocked use the ENTER button to lock, or if locked use the CANCEL button to
unlock).

NOW GO TO STEP #6.

6. Use the 10 KEY PAD or SCAN buttons to select the channels that are
locked, or, use the INPUT button to select the external inputs that are
locked.

7. At each locked channel or input press the CANCEL button.
The screen will indicate that the channel or input is either locked or
unlocked.

8. When all of the channels and/or inputs are unlocked, press the MENU
button again. TV main menu will be displayed.

9. Press the #5 button (CHANNEL LOCK option).

10. Press the #2 button (channel lock OFF option). The screen will now ask
for a code number again.

11. Press the #9 and QV buttons at the same time. The screen will return
to the CHANNEL LOCK MENU and indicate that the lock is OFF

12. Press the MENU button twice to return to normal viewing.

The parental lock is now entirely cancelled.

---------------------------------------------------------------

Bob Waterman, CET® #RI-28
Master Technician License #9109
Service Manager / Parts Manager
Gemini Computer, TV, & Security Alarms
(508)695-7302
(508)695-7769 FAX
geminitv@xxxxxxxxxxxxxxxx
geminitv@xxxxxxx
www.geminicomputertvsecurityalarms.com

MY little baby was playing with the remote and now it has been locked off and wont come on, can you please help me?

Well after spending about 45 mins on hold and searching the internet for the last 2 days the resolution to this issue is to hold the display button down for 3 secs .... Yep thats it Hope this saves someone some time --Brian