How to rest the error 'check for apporiate paper' fault in kyocera fs6525 mfp copier

SOURCE: Kyocera 2050 Has set toner error

Take out the toner and clean all contacts that you see. and make sure that it is seated properly. if the contacts are not touching it will not see the cartriage.

SOURCE: Kyocera mita 1810 copier error codes C and 620

do this cervic code : "163"

SOURCE: Kyocera FS1118 mfp

FS1118 scanning issue - this may sound like a long process but its easy...

Just create a folder called scans in your c:/ drive right click and share the folder

Go to the kyocera command centre (type the ip address of the machine into your browser, taking note your machine must be networked)

Once in kyocera command centre

Click on basic

on the left menu select address book, contacts

create a new contact and under SMB

only insert your computers IP address in the host field

and insert the file name scans in the path field.

Click submit...

Once complete go to your machine

insert a page to scan, select the send button

press the address key

select the contact you created

select ip address press enter

now press 2 on the keypad

press enter

press 2 again

enter again

and then press the green start button once complete..

The scanned document will appear in the scans folder

SOURCE: MY COPIER (KYOCERA 1635) DISPLAS ERROR C6050. HOW

C6050 Abnormally low fuser unit thermistor temperature The fuser temperature remains below 90°C/194°F for 1 s. Poor contact in the thermistor connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Broken fuser thermistor wire. Measure the resistance. If it is ∞ ω, replace the fuser thermistor. Fuser thermistor installed incorrectly. Check and reinstall if necessary. Fuser thermostat triggered. Check for continuity. If none, replace the fuser thermostat. Fuser heater M or S installed incorrectly. Check and reinstall if necessary. Broken fuser heater M or S wire. Check for continuity. If none, replace the fuser heater M or S. Code Contents Remarks Causes Check procedures/corrective measures

SOURCE: Kyocera Mita Kyocera FS-1028 MFP Laser Print -

printer is working but scanner is not working