I have a kings craft and it want start it is the 1705 and I've had it for 3yrs andused it 1 time help me.

Yes you can. You need a cable that will go from your machine to your computer. It's usually just a simple printer cable. Then you have down download some software from Cricut.com called Cricut Craft Room. Then you should be good to go. :)

It is probably a fuel related issue. It's most likely not ignition related because it starts and runs for a bit.
Clean the carb, make sure gas gets to the carb. Give it another try.

I would go online and see if they have directions because occasionally that can be the solution

May have condinsation around the winding inside. Shut it off, try again (may have been a fluke)

Here is a list of some ideas for leather crafts. Have fun!
http://papernstitchblog.com/2012/05/04/friday-diy-9-things-you-should-make-with-leather/

did you change the oil or check oil level?,and please make sure its the right type of oil

check the cable between printer and computer may be the cable is corrupted

Hi,

once you have launched at least 1 hibernation module, 1 life support module, 1 fuel pod and 1 propolsion module then you go to the game menu and there will be a button marked "see the progress of your space craft" click on it and you will come to a display showing you shuttle craft then the will be a button saying "launch your space craft to alphi centuri" click it and your space craft will start to move it will tell you what year it will arive in that time if your capital city is captured then it will not work

The 1705 will only support 2 sticks of 1 GB each.

you need the red yellow and white hookups on your pc